9 DIY Projects You Should Never Attempt in Humid Weather
Heat and humidity can not only wreak havoc on you physically, it can also be disastrous when it comes to some home improvement projects. Here are 9 DIY projects you should put on hold when the humidity level is high.
Heat and humidity affects drying time when it comes to paint. High humidity means there is more moisture in the air, so in turn it will take longer for the water in your paint to evaporate. Put off any outdoor DIY projects that involve painting until the humidity level drops. Try these 15 tips for painting outdoor furniture.
Roofing in hot and humid weather can not only be miserable since you’re stuck in the hot sun, but it can be dangerous. When weather conditions call for high humidity, do some roof work early in the morning before the humidity level gets too intense, then take a break until later in the day. The last thing you want is to be stuck up on a roof and feel light-headed. Leaky roof? Try these 12 repair tips.
Concrete will set as the cement hydrates, which means when the air has excess moisture, the concrete can dry too quickly. Concrete grows stronger when given ample time to dry, so if it dries too quickly, the dried concrete won’t be as strong and may be prone to cracking. Learn how to pour a concrete slab successfully with these 31 tips.
Staining the Deck
When staining your deck or any outdoor furniture, the humidity level should be no higher than 70 percent for optimal drying. Too much humidity may leave you with an uneven finish, so put this DIY project on hold. Follow these tips for staining wood evenly.
Over time, deck boards may become uneven and need a little adjustment. Hold off on this DIY project if humidity levels are high. Humidity can cause wood to swell, which may create more problems if you try to make fixes when the boards are swollen. Try these easy fixes for repairing deck floor boards and railings.
The air’s humidity level can affect how long it will take caulk to cure or dry. Caulking—whether you are using a silicone- or acrylic-based caulk—is a DIY project you should put on hold when humidity levels are high to ensure optimal results. These caulking tips will give you perfect results every time.
This tip is more about safety than results. If you have a DIY project that involves work in the attic, put it off until the heat and humidity are at more comfortable levels. Since air often doesn’t circulate well in attic spaces, it can be difficult to breathe. Check out these 13 unexpected attic spaces you’ll adore.
The last thing you want when installing new windows is for humidity to get trapped in the panes. Built up condensation can impact wood, concrete, plaster and brick and cause long-term damage in your home. Put off this DIY project until humidity levels are lower.
High humidity can cause wood to swell. If you’re planning a hardwood flooring project, the last thing you want is your flooring to be swollen, then retract when the air dries out, leaving you with some big gaps between floor boards. Yes, you can install wood flooring over concrete! Here’s how.