Save on Pinterest

Build Twin Closet Shelves

If one closet shelf is good, two must be better

FH15FEB_CLOSET_01-2Family Handyman

Build closet shelves that double your storage space with these plans for twin shelves. Take your closet real estate to its full potential and store twice as much.

You might also like: TBD

Time
One day
Complexity
Simple
Cost
$20 – $100

Build and secure the shelves

Photo 1: Secure blocking to the existing shelf

Buy your baskets, then cut spacer blocks 1/2 in. wider than the baskets are tall. Cut the ends of the blocks at an angle to accommodate the wider top shelf. Screw blocks to the bottom shelf, spacing them 1/2 in. farther apart than the baskets are wide. Then install and secure the top shelf.

I tossed my hat onto the closet shelf the other day and discovered a whole lot of unused real estate up there. Made me think, if one shelf is good, two would be better. And the upper shelf could be 15 in. deep instead of 12 in. because there’s no closet rod hanging out below. The deep baskets help with the organization; cabinet knobs make for easier access. We show a two-tier shelf; you can install three if your closets (and you) are tall enough.

Figure A: Closet Shelf

This diagram shows how the individual pieces of the twin closet shelves fit together.

Required Tools for this Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

  • Circular saw
  • Cordless drill

Required Materials for this Project

Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.

  • 1-5/8-in. screws
  • Baskets
  • Brackets
  • Closet rod
  • Plywood