Save on Pinterest

How to Check Tire Pressure

Learning how to check tire pressure is easy and inexpensive. Make it a part of your monthly maintenance routine in a matter of minutes.

Every product is independently selected by our editors. If you buy something through our links, we may earn an affiliate commission.

1 / 7

Driving on improperly-inflated tires can wear out the tread and cause steering problems. That’s why it’s important to check your tire pressure regularly.

Fortunately, checking tire pressure only requires two tools β€” a tire pressure gauge and an air compressor. Most gas stations have an air compressor so you only need to own one tool. The whole process is relatively quick, too. In a matter of minutes you’ve done a lot to ensure a safe and smooth ride.

Before you begin, make sure the car has been parked for three to four hours so you get an accurate reading from the gauge. If you drive to a gas station to use an air compressor, try to find one less than a mile away.

2 / 7
Person using a pencil gaugeVeronica Graham

Tools Required

  • Tire pressure gauge. A standard gauge, called a pencil gauge, can do the trick for less than $10. A digital gauge is also a good choice because it’s ergonomic and easy to read. There are also gauges (analog and digital) that attach to an air compressor hose so you can check the pressure and inflate the tire all at once.
  • Air compressor. Many gas stations have air compressors that cost 50 cents to $1 to use. A portable air compressor that plugs into the 12 volt auxiliary power outlet will also work; just be sure the air hose will reach all four tires.

3 / 7
PSI stickerVeronica Graham

Step One: Determine Recommended PSI

The driver’s side door jamb typically has a sticker with the recommended PSI (pounds per square inch) for the tires. Most manufacturers recommend 30 to 32 PSI for all four tires, although some cars will have different PSI recommendations for the front tires and back tires. If you don’t see the recommended PSI on your door jamb, check your owner’s manual.

4 / 7
Removing valve capVeronica Graham

Step Two: Remove Valve Cap

Unscrew the cap on the tire air valve and place it somewhere safe.

5 / 7
Reading the pressure gaugeVeronica Graham

Step Three: Check the Pressure

Press the gauge onto the tire air valve straight on, and press it hard. This creates a tight seal around the tire air valve so you don’t accidentally release air from the tire. You’ll hear a hissing sound if air is coming out. A small bar with numbered notches will pop out of the pencil gauge with the tire pressure reading.

6 / 7
Inflating tireVeronica Graham

Step Four: Inflate Tire

Fill up the tire by pressing the air compressor nozzle onto the tire air valve in the same manner as the gauge β€” hard and straight-on to create a tight seal. Hold the nozzle onto the tire air valve for about 30 seconds to one minute, depending on how low the initial reading is. Repeat Step Three to get the new reading. Add or release air as needed to reach the recommended PSI.

7 / 7
Checking tire pressureVeronica Graham

Step Five: Check Remaining Tires

Repeat Steps Three and Four on the three remaining tires.