Table Saw Worktable

Turn your table saw into an extra work-bench with a piece of 3/4-in. plywood. Wood strips around the plywood make for a snug fit.

Is your shop too small? (Duh, whose isn’t?) Take a tip from reader Dan Burbank: Turn your table saw into an extra work-bench with a piece of 3/4-in. plywood. Wood strips around the plywood make for a snug, non-slide fit on the metal table. Two cautions: Unplug the saw before using it this way, and make sure the saw blade is cranked below the table’s surface.

table saw worktable

Popular Videos