Shortcut for Faster Cutting
Speed up cutting with this easy measuring tip from one of our favorite editors.
Mark Once, Cut 10 Times
If I’m cutting a bunch of boards to roughly the same length, I mark them all at the same time. With every mark, I add 1/8 in. to allow for the blade thickness. For example, if I’m cutting 12 in. boards, the first mark is at 12 in. The second is 12-1/8, the next one is 12-1/4, then 12-3/8 and so on. I don’t use this trick for precision, but is a great way to save some time on the job site. – Travis Larson