Scrounged Glue Dispensers

Here’s a nifty tip—with a nifty tip—from faithful reader Don Ayers: Fill snap-capped sports water bottles with glue and stick them upside down in a hunk of 2×6.

glue dispensers water bottleFamily Handyman

Save Your Water Bottles!

Here’s a nifty tip—with a nifty tip—from faithful reader Don Ayers: Fill snap-capped sports water bottles with glue and stick them upside down in a hunk of 2×6. Now you don’t have to wait for the glue to run into the neck of the bottle, and the cap will control glue flow (and never get lost!). To holster the glue dispensers, cut holes in the base with a spade bit that’s a smidgen larger than the cap’s diameter.

Popular Videos

P.S. Be sure to snap the lid closed before returning the bottle to the base. Otherwise the whole bottleful of glue will run out! The snap-cap makes an airtight seal and controls bead size when you squeeze.

Check out 45 of the most clever gluing tips and tricks from editors and readers of The Family Handyman. You’ll definitely want to keep these in mind during your next woodworking projects!

glue dispensers Family Handyman