On-a-Roll Hardware Headquarters

This plywood cabinet keeps all your screws, washers, nuts, nails and bolts in one spot and ready to roll to any project or repair job. It offers 30 drawers and a lower shelf for extra storage.

The Family Handyman

This plywood cabinet keeps all your screws, washers, nuts, nails and bolts in one spot and ready to roll to any project or repair job. It offers 30 drawers and a lower shelf for extra storage. To build it, you’ll need:

Popular Videos

■ A half sheet of 3/4-in. plywood, cut into two 3/4-in. plywood sides, 31-1/2 x 12-1/2 in., and three 3/4-in. plywood shelves, 14-1/2 in. x 12-1/2 in.

■ Four 2-1/2 in. swiveling casters

■ Two 15-drawer cabinets

■ Four 1/4-in. x 1-in. x 18-3/4 in. hardwood strips

Screw the sides and shelves together with 1-5/8 in.screws, leaving 7 in. between the lower and middle shelves and 18-3/4 in. between the middle and upper shelves. Slide the plastic cabinets into the frame and screw on the wood strips to secure the cabinets. Add the casters and load the drawers.Your projects and repairs will go much faster, thanks to this idea for a hardware store on wheels from reader Douglas LaBelle.