Hinged Router Fence
To make this pivoting router fence, just drill a 1/2-inch diameter hole in one end of your existing fence and insert a short length of 1/2-inch dowel.
Making small fence adjustments is a snap with this pivoting fence. To make it, just drill a 1/2-in. dia. hole in one end of your existing fence and insert a short length of 1/2-in. dowel. Then drill a hole in the router table so the fence can pivot. Now you only have to loosen one clamp to position the fence the right distance from the bit.
Popular Videos
Originally Published: December 22, 2017