Here’s What You Need to Know About TIG Welding: Pros, Cons, Cost and More
If you haven’t welded in a while, practice TIG welding on scraps before welding actual parts.
Whom It’s For
TIG welding takes lots of practice, as it requires both hands as well as one foot. Compared with MIG or stick weld-ing, it’s a bit like going from driving an automatic to driving a stick shift. TIG welding is well suited for auto bodies, chassis/frame, aluminum oil pans, stainless exhaust, metal art, sheet metal, piping systems, motorcycles and bikes.
TIG WELDING COST
- $250 and up.
TIG WELDING PROS
- Capable of greater precision than the other processes.
- Strong, high-quality welds.
- Nice-looking weld beads.
- Welds a large range of alloys.
TIG WELDING CONS
- Parts must be very clean.
- High-quality machines are expensive.
- Requires lots of practice to become proficient.
- Much slower than MIG.
With a TIG setup, the electrode is a tungsten wire. The electrode is not the filler material, as it is with the other processes. The filler is typically a long handheld rod instead of a wire feed spool, and you control the amperage using a foot pedal.