Grinder Gripper

Here’s a neat way to free up your hands when using a rotary tool for sharpening and other delicate jobs.

Here’s a neat way to free up your hands when using a rotary tool for sharpening and other delicate jobs. Screw an angle bracket ($1.50 at hardware stores) to a board and attach the rotary tool to the bracket with a couple of radiator hose clamps. Don’t tighten them too much or you’ll damage the tool housing. The board lets you clamp the tool either vertically or horizontally.

Here’s another rotary tool project.

Popular Videos

Grinder Gripper workshop tip