Easy-Clamp Sacrificial Fence

Family Handyman

Stop searching for and wasting scrap plywood

I often use a sacrificial fence clamped to my table saw’s fence, especially for cutting rabbets. After a few instances of the clamps being in the way, I decided to make one that moves the clamps completely out of the way. It’s just a “sandwich” with two strips of plywood as the “bread” and three spacer blocks as the “meat.” The blocks provide space for my clamp heads, so they’re completely out of the way. – Brad Holden

Build a crosscut sled for your table saw to keep alongside this sacrificial fence.

Plus: Watch the following video to see more smart woodworking tips: