Caulk Tube Seal Puncher

Add a homemade seal puncher to your caulk gun.

caulk

Caulk Tube Seal Puncher

Add a homemade seal puncher to your caulk gun. Cut a 4-in. length of coat hanger and bend one end into a loop. Drill a 1/8-in. hole through the bottom of a caulk gun 1/4 in. back from the end. Stick a 1/2-in. No. 6 bolt through the top of the gun. Slip the coat hanger and washer over the end of the screw and tighten with a locknut so the coat hanger pivots. Flip the coat hanger out to punch the seal on caulk or glue tubes, and pivot it under the gun to keep it in place.

Popular Videos

Craig R. Smith
Tips For Caulking