Save on Pinterest

Front-Loading Washer Won’t Drain

Easy fix for front-loaders

Front-Loading Washer Won't Drain maytag maxima washer problemsFamily Handyman
A front-loading washing machine that won't drain may need nothing more than a simple filter cleaning, especially if it's a Maytag. Learn how to access the filter and how to clean it.

You might also like: TBD

Find and clean the filter if front-loading washer won’t drain

maytag 2000 series washer maytag maxima washer problems

Photo 1: Remove the front panel

Tilt the washer back and slide blocks under the front legs for easier access to the screws. Remove the screws and lift off the front panel.

Photo 2: Twist off the filter

If your washer has a filter that’s separate from the drain pump, you’ll see it alongside the pump. Unscrew the filter by turning it counterclockwise. Clean it out and reinstall it.

If your front-loading washing machine doesn’t drain, there could be an easy fix, especially if you own a newer Maytag masher (like the maytag 2000 series washer). Even though some instruction manuals don’t mention it, there’s a filter near the water pump that catches stuff before it gets into the pump and causes damage. If the filter gets clogged, it can prevent your machine from draining. In some cases, a code number will show up on the digital display. If you look up the code in the instruction manual, it will indicate a problem with suds or tell you to check the filter. On Maytag front loaders, it’s easy to avoid these problems by cleaning the filter every six months. On newer Maytag machines, you can access the filter easily by removing the front panel (Photo 1). On Frigidaire and some other brands, the filter is part of the pump and you’ll have to remove a hose or the entire pump to clean it.

Required Tools for this Front-Loading Washer Won’t Drain Project

Have the necessary tools for this DIYmaytag maxima washer problems project lined up before you start—you’ll save time and frustration.

  • 4-in-1 screwdriver