Tile Removal: Start with a chisel and hand maul
Chisel up tiles
Work the chisel between the tiles and the concrete, hammering them up with a 2-lb. maul.
Smooth the old concrete
After all the tile is broken up, spread thin-set mortar over the concrete to level and smooth it before laying the new floor.
There’s no easy way on how to remove tile. Unlike tile on cement board or wood, there’s no underlayment or subfloor that can be pried up and thrown away. How to remove tile from concrete requires knocking out the tiles and adhesive. How to remove tile takes time and hard work. Even a small bathroom will take half a day, at a minimum.
Use a 3/4- or 1-in. masonry chisel and a 2-lb. hand maul. Start at a broken tile or between tiles where the grout has loosened. Work the chisel under the tiles, forcing them loose. Strike the face of stubborn tiles to break them up for easier removal. Wear safety glasses, gloves, pants and a long-sleeve shirt, since hammering the tile sends sharp shards flying. Also wear a dust mask.
Typically, older floors with mastic adhesive will come up easier than floors laid with thinset mortar. Rent a small jackhammer with a chisel point if the tile refuses to come loose. For larger rooms, consider renting an electric tile stripper.
After you remove the tiles, chisel and scrape the adhesive off the concrete as well. If you can’t get it all, don’t worry. You can leave bits of adhesive up to 1/8 in. thick. Then use the flat side of a 12-in. trowel to apply a 1/8-in. layer of latex thin-set mortar over the floor. This is to fill in voids and level around remaining bits of adhesive. If you’re installing new tile, use the same latex thin-set to set the tile. Thin-set holds ceramic tiles better than mastic and is easier to work with.
Keep in mind that the easiest solution of all is to leave the old tile in place and install new tile directly over the old. The new floor will be slightly higher, so you’ll have to trim the door and extend the toilet ring. For more details, talk with an expert at a local tile store
Required Tools for this How to Remove Tile Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Cold chisel
- Dust mask
- Knee pads
- Safety glasses
- Shop vacuum