This workbench is simple enough and cheap enough that you can make it in a morning, and yet it's big enough for serious woodworking and hobby projects. Add pegboard, a bench vise and a few other accessories and you'll have a serious work center.
By the DIY experts of The Family Handyman Magazine:September 2009
Assemble the frames for the work surface and lower shelf.
Screw the legs to the work surface frame.
Flip over the bench and attach the lower shelf frame. Use gallon paint cans to support the lower shelf frame when you're attaching it to the main workbench legs.
Screw the plywood to the frames.
Assemble the top shelf frame.
Add the plywood.
Attach the top shelf legs upside down.
Screw the legs to the bench and add the backer boards
This sturdy 30-in. x 6-ft.-long
workbench is the ultimate in
simplicity. It’s made from only fifteen
8-ft.-long 2x4s and one sheet of 1/2-in.
plywood. Follow the cutting diagrams to
cut the parts: Figure B to cut the plywood
tops, then Figure C to cut all the framing.
Use the lengths provided in the Cutting
List (see Additional Information below). You can either screw the framing
together with 3-in. screws or hand- or
power-nail it together with 3-in. nails.
Screw the plywood down with 1-5/8-in.
To make these project plans even
easier to follow, we tinted the parts that get added at each step.
All the dimensions and pieces are shown in Figures A, B and C, and keyed to the Cutting List in Additional Information (below). All together you'll need fifteen 2 x 4 x 8s and one sheet of 1/2-in. plywood.
Good light is mandatory for any workbench. Buy an inexpensive 4-ft. shop light and screw it right to the underside
of the top shelf.
Forget extension cords. Mount a power strip to one of the legs and you'll have all the power you need for tools and chargers. Use
its switch to control the light.
Whether you cover the whole back or just the lower half, keep down the bench clutter by stowing all of those tools you use
every day within easy reach.
Yes, it'll cost as much as or more than the bench, but what workbench would be complete
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.
Copyright © 2014 The Family Handyman. All Rights Reserved.