Vacuum Attachment for Adjustable Dust Control

Keep your workshop dust-free

Required Tools for this Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

  • Miter saw
  • Cordless drill
  • Circular saw
  • 4-in-1 screwdriver
  • Adjustable wrench
  • Drill bit set
  • Jigsaw
  • Router
  • Safety glasses
  • Shop vacuum
  • Table saw

A band saw or scroll saw may also be helpful

Required Materials for this Project

Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.

  • A One 3“ x 24“ x 3/4“ lower T-Track board
  • B One 2-1/2“ x 30“ x 3/4“ upper board
  • C Two 2“ x 5“ x 3/4“ bracket boards
  • D Two 5“ x 7“ x 3/4“ boards for the yoke
  • E Two 4“ x 1/2“ mending plates
  • F Two 2-1/2“ x 1/4“ carriage bolts, nuts and washers
  • G Four 1-1/2“ No. 10 sheet metal screws
  • T-Track hardware:
  • H Two 5/16“ x 1-1/2“ T-bolts
  • I One 24“ mini aluminum T-Track
  • J Two 5/16“ styrene knobs