Build a Table Saw Sled

Get dead-on square cuts and 45-degree miter cuts every time!

Required Tools for this Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

  • Hammer
  • Clamps
  • Tape measure
  • Adjustable wrench
  • Belt sander
  • Drill/driver, cordless
  • Countersink drill bit
  • Drill bit set
  • Framing square
  • Jigsaw
  • Utility knife
  • Table saw
  • Wood glue
  • Wood chisel

Required Materials for this Project

Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.

  • See the Materials List in Additional Information in the Step-by-Step section.
  • Sandpaper, 80-grit
  • Spray adhesive