This handy toolbox holds all your small garden tools and is light and strong. It’s an easy project that you can make in just a few hours.
Screw the box together with deck screws. Predrill and countersink the screws to avoid splitting.
Cut the branch ends to fit. Attach the pieces to the sides of the toolbox with screws or nails. Predrill to avoid splitting.
Drill 1/4-in. holes through the handle ends and drive in the dowels to hold the handle in place.
This simple gardening toolbox gets its natural charm from the branches used for the sides and handle. When you’re searching for branches, choose green, freshly cut ones for strength and flexibility. The only tools required are a saw and a drill and maybe a knife to whittle the handle ends.
Along with three 25-in.-long branches, you’ll need a 6-ft. 1x6, a 4-ft. 1x4 and a short length of 1/4-in. wood dowel, exterior wood glue and a handful of 1-5/8-in. deck screws. We used clear pine, but No. 2 pine or cedar will work fine too.
Cut the parts using Figure A as a guide. Then screw the box together (Photo 1). Whittle the handle ends to fit the holes. You’ll have to bend the handle to slip it into the second hole.
Cut away any knobs on the branches for the sides. Then attach them, keeping the screws at least an inch from the ends to avoid splits (Photo 2). Finally, drill 1/4-in. holes through the handle ends and drive in the dowels to hold the handle in place (Photo 3).
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
Drill bit, 1-in.
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.