Sign up today for FREE and become part of The Family Handyman community of DIYers.
George Vondriska provides step-by-step instruction on how to use an FMT (Frame Mortise and Tenon ) jig to cut a tenon and mortise.
George Vondriska provides instruction on how to setup a router table to use a one piece tongue and groove bit.
Mortise - and - tenon joinery is one of the most reliable we have, but if your tenons are not sized properly, or they are inconsistent, it can make difficult times in assembling your projects. George Vondriska reveals a shop trick he has learned that results
The Family Handyman editor, Ken Collier, shows you how to glue and clamp biscuit joints for a strong and nearly invisible joint.
In pursuit of the perfect miter joint ? These tips for tighter miters cover common situations you’ll undoubtedly encounter in your workshop.
Take your woodworking skills up a notch. Learn how to make the four basic biscuit joints with these close-up, step-by-step photos and videos.
Even a novice can build nice cabinets. Make tight, strong wood joints quickly and easily with pockets screws. No clamps, no dowels. We show you how to do it in two steps.
We'll show you how to replace a damaged hardwood floorboard in just a couple hours using basic carpentry tools. This article covers removing a hole-filled or otherwise damaged tongue - and - groove board, then installing a new one.
Get timely DIY projects for your home and yard,
plus a dream project for your wish list!
Please enter valid E-Mail Address
The Site Map has a complete listing of our categories.