Band Saw

Other Articles for DIYers from Around the Web

1. How to Mix and Top off Bandsaw and Cold Cut Saw Coolant

   Article

   FromInstructables: exploring - workshop - featured

   This Instructable explains how to add coolant to either the horizontal bandsaw or the cold cut saw. Coolant keeps the blade and material cool as cuts are made as well as aiding in clearing metal chips out of the cut. Measure out the Coolant The coolant we used is mixed with water at a 1 to 10 ra... ...
2. Band Saw Sled for Small Pieces of Wood...

   Article

   FromInstructables: exploring - workshop - woodworking - featured

   Made with the Laser Engraver... I had a need to cut multiple dowels and didn't have access to the table saw right away. I drew a simple sled - a foundation design for more enhancements and sizes - which I could burn and assemble with glue. I built this at TechShop San Jose - www.techshop.ws He... ...
3. Stool made at TechShop (Roundrock)

   Article

   FromInstructables: exploring - workshop - featured

   This is an Intractable detailing how to make a simple stool. The stool I am making I made at TechShop Things you will need: Materials: 1. Wood ( I used scraps) 2. Glue 3. Biscuits (for joining beveled edges) 4. Screws (to attach base to top) Tools: 1.Table saw 2. Band saw 3. Miter saw 4. Drill 5. ...
4. Key-Shaped Key Hanger

   Article

   FromInstructables: exploring - workshop - woodworking - featured

   My friend Steve requested a key-shaped key hanger for Christmas, (and I finished it just in the nick of time).  It's a fairly easy project if you have a drill-press and scroll/ band saw .  Total cost of the project was $1.73 for the key hanger hooks from the local hardware store.   I always have a ...