Home>Videos>Videos by Skill>Carpentry Videos

Carpentry Videos

Browse these carpentry videos and get ideas, solve a problem or get how-to advice.


Edge Gluing Boards

The Family Handyman Editor-in-Chief, Ken Collier, will show you how to edge glue boards. This basic woodworking skill will help you in many different woodworking projects. All you need are boards you want to join, clamps, glue and wax paper. Watch Video »

Source: TheFamilyHandyman296 views
  1. From The Family Handyman
  2. Most Viewed
  3. View All
«12
Results Per Page:
Showing results 1 - 20 of 29
  1. Edge Gluing Boards

    Source:TheFamilyHandyman

    296 views

    The Family Handyman Editor-in-Chief, Ken Collier, will show you how to edge glue boards. This basic woodworking skill will help you in many different woodworking projects. All you need are boards you want to join, clamps, glue and wax paper.

  2. How to Sharpen a Router Bit

    Source:TheFamilyHandyman

    537 views

    If you router bit isn't cutting as cleanly as it used to, this video is for you. You don't need to go buy a new one because The Family Handyman Senior Editor, Gary Wentz, will show you sharpen your dull router bit.

  3. How to Mark a Board

    Source:TheFamilyHandyman

    842 views

    The Family Handyman carpentry expert, Mark Petersen, will show you how to properly mark a board before cutting it on a miter saw.

  4. Circular Saw Safety Tips

    Source:TheFamilyHandyman

    945 views

    The Family Handyman editor, Jeff Gorton, will share tips that will keep you and your fingers safe when using a circular saw.

  5. How to Apply Edge Banding

    Source:TheFamilyHandyman

    219 views

    The Family Handyman Senior Editor, Gary Wentz, will show you how to apply iron-on edge banding. It’s the easiest way to cover plywood edges and it makes inexpensive plywood look like solid wood.

  6. Sanding Wood Part1: Sanding Tips

    Source:TheFamilyHandyman

    1746 views

    Do you think sanding is a brain dead job and you hate it? The Family Handyman editor, Travis Larson, does too. He will share some tips with you to make sanding wood quicker and less boring.

  7. How to Use a Tape Measure

    Source:TheFamilyHandyman

    159 views

    You can use a tape measure for more than just measuring. The Family Handyman Senior Editor, Travis Larson will show you clever ways to use a tape measure to save time on your next project.

  8. Choosing the Best Circular Saw Blade

    Source:TheFamilyHandyman

    1640 views

    The Family Handyman editor, Jeff Gorton, share some tips on how to choose the best circular saw blade for whatever job you are doing. After you watch this video you will be able cut wood, tile, brick, and even steel with your circular saw with the right blade.

  9. How to Set Up a Stop Block for Your Miter Saw

    Source:TheFamilyHandyman

    540 views

    If you have several identical cuts to make, a stop block will make it go a lot quicker. The Family Handyman carpentry expert, Mark Petersen, will show you how to set up a stop block for your miter saw to save you time.

  10. How to Build a Miter Saw Table

    Source:TheFamilyHandyman

    1621 views

    The Family Handyman carpentry expert, Mark Petersen, will show you how to get more efficient use out of your miter saw by building your own miter saw table.

  11. How to Cut Plywood

    Source:TheFamilyHandyman

    563 views

    The Family Handyman DIY expert, Spike Carlsen, will show you how to cut construction grade plywood and finish grade plywood with a circular saw. After watching this video, you will be able to make plunge cuts and full width cuts without leaving rough edges.

  12. How to Cut a Wide Board With a Miter Saw

    Source:TheFamilyHandyman

    506 views

    The Family Handyman carpentry expert, Mark Petersen, will show you how to cut boards that are wider than what your miter saw was designed for.

  13. How to Make Wood Plugs

    Source:TheFamilyHandyman

    184 views

    The Family Handyman editor, Jeff Gorton, will show you how to make wood plugs for countersunk screws match perfectly.

  14. How to Use a Chalk Line

    Source:TheFamilyHandyman

    190 views

    A chalk line is an essential tool for many projects. The Family Handyman Senior Editor, Travis Larson, shares hints and tips for using a chalk line so you get clean, straight lines on all your projects.

  15. How to Cut Ceiling Tiles

    Source:TheFamilyHandyman

    643 views

    The Family Handyman expert, Wade Sides, will show you how to cut custom ceiling tiles and shadow lines along the wall.

  16. How to Cut Straight With a Circular Saw

    Source:TheFamilyHandyman

    1386 views

    The Family Handyman editor, Jeff Gorton, will show you how to make perfectly straight cuts with a circular saw. You will use this circular saw jig over and over again.

  17. How to Change a Circular Saw Blade

    Source:TheFamilyHandyman

    1066 views

    Is your circular saw blade dull? The Family Handyman editor, Jeff Gorton, tells you the signs of a dull saw blade and how to change the blade on your circular saw.

  18. Sanding Wood Part4: Sand Narrow Wood Faster

    Source:TheFamilyHandyman

    395 views

    Do you have several pieces of narrow wood to sand and think it will take forever? Think again. The Family Handyman editor, Travis Larson, will show you a method to sand these narrow pieces very quickly and without rounding the edges.

  19. How to Trim a Door

    Source:TheFamilyHandyman

    1278 views

    The Family Handyman Senior Editor, Travis Larson, will show you how to trim a door in about 10 minutes per side. The project will take a little longer the first time you do it, but you'll be trimming out doors like a pro in no time. If you are already a pro, you can still pick up some tips.

  20. How to Mix Concrete

    Source:TheFamilyHandyman

    1166 views

    The Family Handyman Senior Editor, Gary Wentz, will show you how to mix concrete. These hints and tips will save you time and effort.

  21. How to Use a Pocket Screw Jig in Woodworking Projects

    Source:TheFamilyHandyman

    550 views

    Pocket screws are a good way to put woodworking projects together. Family Handyman editor, Jeff Gorton, shows you how to use a $40 jig (Kreig jig) that makes using pocket screws to assemble woodworking projects very easy.

  22. How to Use a Biscuit Joiner

    Source:TheFamilyHandyman

    294 views

    A biscuit joiner will help you make strong, fast and accurate joints. The Family Handyman DIY expert, Spike Carlsen, will show you how to use a biscuit jointer to get perfect joints.

  23. How to Use a Circular Saw

    Source:TheFamilyHandyman

    3741 views

    If you've never used a circular saw, The Family Handyman editor, Jeff Gorton will get you started. He will show you how to adjust the depth and set the bevel angle. These two adjustments will allow you to make any number of straight and bevel cuts.

  1. How to Use a Circular Saw

    Source:TheFamilyHandyman

    3741 views

    If you've never used a circular saw, The Family Handyman editor, Jeff Gorton will get you started. He will show you how to adjust the depth and set the bevel angle. These two adjustments will allow you to make any number of straight and bevel cuts.

  2. Sanding Wood Part1: Sanding Tips

    Source:TheFamilyHandyman

    1746 views

    Do you think sanding is a brain dead job and you hate it? The Family Handyman editor, Travis Larson, does too. He will share some tips with you to make sanding wood quicker and less boring.

  3. Choosing the Best Circular Saw Blade

    Source:TheFamilyHandyman

    1640 views

    The Family Handyman editor, Jeff Gorton, share some tips on how to choose the best circular saw blade for whatever job you are doing. After you watch this video you will be able cut wood, tile, brick, and even steel with your circular saw with the right blade.

  4. How to Build a Miter Saw Table

    Source:TheFamilyHandyman

    1621 views

    The Family Handyman carpentry expert, Mark Petersen, will show you how to get more efficient use out of your miter saw by building your own miter saw table.

  5. How to Cut Straight With a Circular Saw

    Source:TheFamilyHandyman

    1386 views

    The Family Handyman editor, Jeff Gorton, will show you how to make perfectly straight cuts with a circular saw. You will use this circular saw jig over and over again.

  6. How to Trim a Door

    Source:TheFamilyHandyman

    1278 views

    The Family Handyman Senior Editor, Travis Larson, will show you how to trim a door in about 10 minutes per side. The project will take a little longer the first time you do it, but you'll be trimming out doors like a pro in no time. If you are already a pro, you can still pick up some tips.

  7. How to Mix Concrete

    Source:TheFamilyHandyman

    1166 views

    The Family Handyman Senior Editor, Gary Wentz, will show you how to mix concrete. These hints and tips will save you time and effort.

  8. How to Change a Circular Saw Blade

    Source:TheFamilyHandyman

    1066 views

    Is your circular saw blade dull? The Family Handyman editor, Jeff Gorton, tells you the signs of a dull saw blade and how to change the blade on your circular saw.

  9. Circular Saw Safety Tips

    Source:TheFamilyHandyman

    945 views

    The Family Handyman editor, Jeff Gorton, will share tips that will keep you and your fingers safe when using a circular saw.

  10. How to Mark a Board

    Source:TheFamilyHandyman

    842 views

    The Family Handyman carpentry expert, Mark Petersen, will show you how to properly mark a board before cutting it on a miter saw.

  11. How to Cut Ceiling Tiles

    Source:TheFamilyHandyman

    643 views

    The Family Handyman expert, Wade Sides, will show you how to cut custom ceiling tiles and shadow lines along the wall.

  12. How to Cut Plywood

    Source:TheFamilyHandyman

    563 views

    The Family Handyman DIY expert, Spike Carlsen, will show you how to cut construction grade plywood and finish grade plywood with a circular saw. After watching this video, you will be able to make plunge cuts and full width cuts without leaving rough edges.

  13. How to Use a Pocket Screw Jig in Woodworking Projects

    Source:TheFamilyHandyman

    550 views

    Pocket screws are a good way to put woodworking projects together. Family Handyman editor, Jeff Gorton, shows you how to use a $40 jig (Kreig jig) that makes using pocket screws to assemble woodworking projects very easy.

  14. How to Set Up a Stop Block for Your Miter Saw

    Source:TheFamilyHandyman

    540 views

    If you have several identical cuts to make, a stop block will make it go a lot quicker. The Family Handyman carpentry expert, Mark Petersen, will show you how to set up a stop block for your miter saw to save you time.

  15. How to Sharpen a Router Bit

    Source:TheFamilyHandyman

    537 views

    If you router bit isn't cutting as cleanly as it used to, this video is for you. You don't need to go buy a new one because The Family Handyman Senior Editor, Gary Wentz, will show you sharpen your dull router bit.

  16. How to Cut a Wide Board With a Miter Saw

    Source:TheFamilyHandyman

    506 views

    The Family Handyman carpentry expert, Mark Petersen, will show you how to cut boards that are wider than what your miter saw was designed for.

  17. Sanding Wood Part4: Sand Narrow Wood Faster

    Source:TheFamilyHandyman

    395 views

    Do you have several pieces of narrow wood to sand and think it will take forever? Think again. The Family Handyman editor, Travis Larson, will show you a method to sand these narrow pieces very quickly and without rounding the edges.

  18. Edge Gluing Boards

    Source:TheFamilyHandyman

    296 views

    The Family Handyman Editor-in-Chief, Ken Collier, will show you how to edge glue boards. This basic woodworking skill will help you in many different woodworking projects. All you need are boards you want to join, clamps, glue and wax paper.

  19. How to Use a Biscuit Joiner

    Source:TheFamilyHandyman

    294 views

    A biscuit joiner will help you make strong, fast and accurate joints. The Family Handyman DIY expert, Spike Carlsen, will show you how to use a biscuit jointer to get perfect joints.

  20. How to Apply Edge Banding

    Source:TheFamilyHandyman

    219 views

    The Family Handyman Senior Editor, Gary Wentz, will show you how to apply iron-on edge banding. It’s the easiest way to cover plywood edges and it makes inexpensive plywood look like solid wood.

  21. How to Use a Chalk Line

    Source:TheFamilyHandyman

    190 views

    A chalk line is an essential tool for many projects. The Family Handyman Senior Editor, Travis Larson, shares hints and tips for using a chalk line so you get clean, straight lines on all your projects.

  22. How to Make Wood Plugs

    Source:TheFamilyHandyman

    184 views

    The Family Handyman editor, Jeff Gorton, will show you how to make wood plugs for countersunk screws match perfectly.

  23. How to Use a Framing Square

    Source:Howcast

    175 views

    You don't have to be a professional carpenter to use a framing square. Even if you're a carpentry hobbyist, the tool can come in handy.

  24. How to Use a Tape Measure

    Source:TheFamilyHandyman

    159 views

    You can use a tape measure for more than just measuring. The Family Handyman Senior Editor, Travis Larson will show you clever ways to use a tape measure to save time on your next project.

  25. How to Install Baseboard Trim

    Source:Homeaddition

    107 views

    Mark Donovan of http://www.HomeAdditionPlus.com shows how to install baseboard trim.

  26. How to Install Crown Molding

    Source:Homeaddition

    63 views

    Mark Donovan of http://www.HomeAdditionPlus.com shows examples of crown molding installations and provides some basic how to tips on installing crown molding.

  27. How to Sharpen Construction Tools

    Source:Re:Fine

    31 views

    This Re:Fine video shows you how to sharpen construction tools step by step.

  28. How to Make the Perfect Miter Cut

    Source:Homeaddition

    13 views

    Mark Donovan of http://www.HomeAdditionPlus.com explains the techniques for making the perfect miter cut when trimming out interior doors and windows.

  29. Cutting an Inside Corner of Baseboards

    Source:homeremodelworkshop

    13 views

    Bob Schmidt shows you a carpentry skill for cutting an inside corner of baseboards.

  1. Edge Gluing Boards

    Source:TheFamilyHandyman

    296 views

    The Family Handyman Editor-in-Chief, Ken Collier, will show you how to edge glue boards. This basic woodworking skill will help you in many different woodworking projects. All you need are boards you want to join, clamps, glue and wax paper.

  2. How to Sharpen a Router Bit

    Source:TheFamilyHandyman

    537 views

    If you router bit isn't cutting as cleanly as it used to, this video is for you. You don't need to go buy a new one because The Family Handyman Senior Editor, Gary Wentz, will show you sharpen your dull router bit.

  3. How to Mark a Board

    Source:TheFamilyHandyman

    842 views

    The Family Handyman carpentry expert, Mark Petersen, will show you how to properly mark a board before cutting it on a miter saw.

  4. Circular Saw Safety Tips

    Source:TheFamilyHandyman

    945 views

    The Family Handyman editor, Jeff Gorton, will share tips that will keep you and your fingers safe when using a circular saw.

  5. How to Apply Edge Banding

    Source:TheFamilyHandyman

    219 views

    The Family Handyman Senior Editor, Gary Wentz, will show you how to apply iron-on edge banding. It’s the easiest way to cover plywood edges and it makes inexpensive plywood look like solid wood.

  6. Sanding Wood Part1: Sanding Tips

    Source:TheFamilyHandyman

    1746 views

    Do you think sanding is a brain dead job and you hate it? The Family Handyman editor, Travis Larson, does too. He will share some tips with you to make sanding wood quicker and less boring.

  7. How to Use a Tape Measure

    Source:TheFamilyHandyman

    159 views

    You can use a tape measure for more than just measuring. The Family Handyman Senior Editor, Travis Larson will show you clever ways to use a tape measure to save time on your next project.

  8. Choosing the Best Circular Saw Blade

    Source:TheFamilyHandyman

    1640 views

    The Family Handyman editor, Jeff Gorton, share some tips on how to choose the best circular saw blade for whatever job you are doing. After you watch this video you will be able cut wood, tile, brick, and even steel with your circular saw with the right blade.

  9. How to Set Up a Stop Block for Your Miter Saw

    Source:TheFamilyHandyman

    540 views

    If you have several identical cuts to make, a stop block will make it go a lot quicker. The Family Handyman carpentry expert, Mark Petersen, will show you how to set up a stop block for your miter saw to save you time.

  10. How to Build a Miter Saw Table

    Source:TheFamilyHandyman

    1621 views

    The Family Handyman carpentry expert, Mark Petersen, will show you how to get more efficient use out of your miter saw by building your own miter saw table.

  11. How to Cut Plywood

    Source:TheFamilyHandyman

    563 views

    The Family Handyman DIY expert, Spike Carlsen, will show you how to cut construction grade plywood and finish grade plywood with a circular saw. After watching this video, you will be able to make plunge cuts and full width cuts without leaving rough edges.

  12. How to Cut a Wide Board With a Miter Saw

    Source:TheFamilyHandyman

    506 views

    The Family Handyman carpentry expert, Mark Petersen, will show you how to cut boards that are wider than what your miter saw was designed for.

  13. How to Make Wood Plugs

    Source:TheFamilyHandyman

    184 views

    The Family Handyman editor, Jeff Gorton, will show you how to make wood plugs for countersunk screws match perfectly.

  14. How to Use a Chalk Line

    Source:TheFamilyHandyman

    190 views

    A chalk line is an essential tool for many projects. The Family Handyman Senior Editor, Travis Larson, shares hints and tips for using a chalk line so you get clean, straight lines on all your projects.

  15. How to Cut Ceiling Tiles

    Source:TheFamilyHandyman

    643 views

    The Family Handyman expert, Wade Sides, will show you how to cut custom ceiling tiles and shadow lines along the wall.

  16. How to Cut Straight With a Circular Saw

    Source:TheFamilyHandyman

    1386 views

    The Family Handyman editor, Jeff Gorton, will show you how to make perfectly straight cuts with a circular saw. You will use this circular saw jig over and over again.

  17. How to Change a Circular Saw Blade

    Source:TheFamilyHandyman

    1066 views

    Is your circular saw blade dull? The Family Handyman editor, Jeff Gorton, tells you the signs of a dull saw blade and how to change the blade on your circular saw.

  18. Sanding Wood Part4: Sand Narrow Wood Faster

    Source:TheFamilyHandyman

    395 views

    Do you have several pieces of narrow wood to sand and think it will take forever? Think again. The Family Handyman editor, Travis Larson, will show you a method to sand these narrow pieces very quickly and without rounding the edges.

  19. How to Trim a Door

    Source:TheFamilyHandyman

    1278 views

    The Family Handyman Senior Editor, Travis Larson, will show you how to trim a door in about 10 minutes per side. The project will take a little longer the first time you do it, but you'll be trimming out doors like a pro in no time. If you are already a pro, you can still pick up some tips.

  20. How to Mix Concrete

    Source:TheFamilyHandyman

    1166 views

    The Family Handyman Senior Editor, Gary Wentz, will show you how to mix concrete. These hints and tips will save you time and effort.

«12
+ Add Your Comment

Free OnSite Newsletter

Get timely DIY projects for your home and yard, plus a dream project for your wish list!

Follow Us