Slide floor tile under door casings for the cleanest appearance. Cutting the casing bottom is easy with a handsaw.
By the DIY experts of The Family Handyman Magazine:April 2007
When installing floor tile in a finished room, it's better to slide the tile under door casings rather than fit it around them. You'll end up with a better-looking floor. If you butt the tiles against the
casings (Photo 1), you'll usually end up with uneven gaps that you
have to fill with grout. The gaps won't look good, and chances are the grout will
crack from the vibration caused by the closing door.
Cutting the casings is fairly easy and only takes a few minutes if you have a
sharp handsaw or special “jamb” saw. Simply place a tile next to each casing,
add 1/8 in. for the adhesive thickness (use 1/8-in.-thick cardboard as a guide),
mark the casings and saw at the mark. Sliding the tiles under the casings eliminates
the need for grout and hides the cut edges (Photo 2).
Tile that fits under the casing (Photo 2) usually looks better than tile cut around the casing edges (Photo 1).
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
You'll also need tile-setting tools.
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.
Copyright © 2013 The Family Handyman. All Rights Reserved.