• Share:
Energy Act Requires New Light Bulbs to Conserve Energy

Learn the new rules for light bulbs being sold in 2012 and how to choose the best bulbs for your home - halogens, fluorescents and LEDs. We'll also show you the top rated bulbs and what you can expect from them.

By the DIY experts of The Family Handyman Magazine

The coming changes in available lightbulbs

The Energy Independence and Security Act of 2007 takes effect in January, which means that shopping for lightbulbs will never be quite the same again. The act requires lightbulbs to deliver light levels similar to those of traditional incandescent bulbs but to use 25 percent less energy. Between now and 2014, conventional incandescent bulbs will be phased out, starting with the 100-watt bulb in 2012.

“From an energy standpoint, lightbulbs are the low-hanging fruit. As soon as you use more efficient lighting, the dial on the electric meter stops spinning so fast. It’s a no-brainer.”
Mary Beth Gotti,
Manager of the Lighting and Electrical Institute at GE Lighting

The good news is that there are excellent energy-efficient bulbs already on the shelves, with many more to come in 2012. The bad news is that shopping for new bulbs includes a learning curve because none are exact replicas of the incandescent bulbs we’re used to. To make smart choices and avoid frustration, you’ll need to know a bit more about lightbulbs.

And after reading this article, you will.

Don't Panic!

Although most incandescent bulbs will be phased out, popular specialty bulbs, such as appliance bulbs, are exempt from the new standards. Other exempt bulbs include three-way, rough service and colored lights, as well as bug lights and plant lights. Visit energysavers.gov for a complete list of exempt bulbs.

Main lighting technologies 1: Halogen incandescents

Pros: The most similar in looks, light quality and light distribution to a traditional incandescent bulb, yet it’s 30 percent more efficient and lasts several times longer. It starts up instantly, it’s dimmable, its life span isn’t affected by frequent on and off activity, and it doesn’t contain mercury.

Cons: At about $1.50, it costs four times as much as a conventional incandescent bulb and uses a lot more energy than CFLs and LEDs (both are at least 75 percent more efficient than traditional incandescent bulbs). It also burns much hotter and doesn’t give off the exact same glow we’re accustomed to. It produces a brighter, whiter light with an intense glare, so it needs to be shaded, shielded or directed so the filament isn’t in your line of sight.

Best uses: Reading lamps, exterior floodlights, track lighting, under-cabinet lighting and accent lighting.

Handling halogens: Don’t handle a halogen bulb with your fingers; use a clean rag. The oils from your skin will cause the bulb to burn hotter and shorten its life.

Main lighting technologies 2: CFLs

Pros: Compact fluorescents are now better than earlier incarnations at delivering a warmer light without long warm-up times, flickering or buzzing. There are also more CFLs designed for different household fixtures, including recessed cans, outdoor lights and track lights. Most CFLs now contain 60 percent less mercury than five years ago, and prices for CFLs have plummeted. A quality CFL now costs less than $2 a bulb and can save $30 per bulb in electricity costs over its lifetime, compared with a conventional incandescent.

Cons: Some CFLs still warm up slowly and cast a bluer light than conventional bulbs, and most don’t work well with three-way switches or dimmers (even CFLs designed to be dimmed may not work with all dimmer switches). They also contain some mercury. CFL longevity claims are still unreliable; bulb life can be diminished by vibration, cold, overheating in recessed fixtures and being operated in short spurts.

Best uses: Interior fixtures that are left on for extended periods, with a minimal amount of cycling them off and on. Also good for lighting large areas.

Main lighting technologies 3: LEDs

Pros: LEDs are at least as efficient as CFLs, mercury free and excellent for cold weather use. There’s no startup delay, and they work with dimmers. They also have a very long life: 25,000 hours vs. 6,600 for an equivalent CFL. And overall, their light quality is more pleasant than that of many CFLs.

Cons: There are almost no 60-, 75- or 100-watt equivalents on the market; most only shine light in one direction; and they cost $20 to $50. The few on the market that shine light in all directions run in the $50-plus range. Also, LED bulbs that are brighter than 40 watts are still generally dim and don’t fit most existing fixtures. But the future will be brighter. Prices will come down radically over the next few years, quality choices will expand and most industry watchers believe LEDs are the future of lighting...eventually.

Best uses: High-use fixtures such as recessed cans and porch lights, and hard-to-reach fixtures (closets, high ceilings and crawl spaces), where changing a lightbulb is inconvenient.

They’re like old soldiers: LEDs don’t burn out; they just fade away.

Light bulb label

Light bulb label

Read the Label to Compare Bulbs

Lightbulbs now carry package labels to help you choose the most efficient bulbs. For the best quality, buy Energy Star–rated bulbs from a reliable supplier. If you’re buying high-priced LEDs, look for bulbs with at least a three-year warranty and hang on to your receipt.

Light output/brightness: New bulbs are categorized in terms of lumens. The higher the lumens, the brighter the light. A conventional 60-watt incandescent is about 840 lumens.

Energy used/watts: A measure of energy use, not brightness.

Color accuracy/color rendering index: How accurately the bulb will display the colors in a room. Anything higher than 80 is good.

Light color: Warmer, yellow light, similar to incandescent, has a lower color temperature on the Kelvin scale (2,700 to 3,000K). Cooler, bluish light has a higher color temperature (4,000 to 6,500K).

Labels may also include:

Life: Bulb lifetimes are an average based on ideal conditions. Traditional incandescent bulbs are rated for about 1,000 hours, so even CFL bulbs that last only half as long as they’re supposed to will save you money.

Energy star ratings: These ratings indicate that the claims for lifetime, brightness and color temperature have been independently tested.

Top-rated halogen bulbs

Industry analysts and consumer groups gave a high rating to the halogen bulbs shown here.

Top-rated hybrid bulb

Industry analysts and consumer groups gave a high rating to the hybrid bulb shown here.

Top-rated CFL bulbs

Industry analysts and consumer groups gave a high rating to the CFL bulbs shown here.

CFL second chance: If you swore off CFLs a few years ago, give them another try. They’re way better now. But don’t buy the cheapest ones. You’ll just be disappointed again.

Top-rated LED bulbs

Industry analysts and consumer groups gave a high rating to the LED bulbs shown here.

Switch60 warm white LED bulb

Photo courtesy of SwitchlightSwitch60 warm white LED bulb

GE Energy Smart LED bulb

Photo courtesy of GEGE Energy Smart LED bulb

Philips 10-watt EnduraLED bulb

Photo courtesy of PhilipsPhilips 10-watt EnduraLED bulb

Newest LED Arrivals

As the technology develops, many new LED bulbs will appear. Here are three.

Switch60 Warm White LED liquid-cooled 60-watt equivalent.
At about $30, the least expensive 60-watt equivalent LED available—scheduled to hit the market in early 2012. Bright but hot to the touch. A 75-watt and 100-watt will come in late 2012. The glass orb is filled with a cooling agent and a bank of LEDs. switchlightbulbs.com

GE Energy Smart LED 60-watt incandescent replacement 13-watt LED.
This bulb (about $45) was scheduled to hit the market in December 2011. Seventy-five- and 100-watt equivalents are due out in 2012. gelighting.com

Philips 10-watt EnduraLED 60-watt replacement.
This bulb recently won the Department of Energy’s $10 million “L Prize” to replace the 60-watt incandescent and the PAR38 halogen. (Not yet for sale but will cost about $45.) Dimmable; same shape and size as an incandescent, so it fits traditional fixtures; has a strong and pleasing light; and will last 25,000 hours. usa.lighting.philips.com

Which bulbs should I use here?

Garage door openers: Choose a “rough service” incandescent bulb (yep, they’re still permitted under the new law). CFLs can’t handle the vibrations and may interfere with your remote control.

High ceilings: Tough-to-reach fixtures are perfect spots for LED bulbs. Although LEDs are still expensive, they last for 10 to 20 years.

“Lightbulbs are becoming a long-term durable goods purchase rather than a quick consumable.”
Peter Soares, Director of Consumer
Marketing at Philips

Lamps and general lighting: CFLs are your best option and they come in both spiral and covered versions. Most LEDs are still too dim or too expensive for general use.

Outdoor Floodlights: Halogen PAR bulbs are the most reliable outdoor bulbs, but if you live in a mild climate, weatherproof CFLs are also a good choice. (Read the package label to see if they can be exposed to rain.)

Motion detectors: LEDs or halogens are a better choice than CFLs. Fixtures with electronic controls can significantly shorten a CFL’s life.

Workbench, reading lamp and office light: Halogen incandescent bulbs produce the brightest, purest light and are a good choice for task lighting.

Recessed fixtures: LEDs or CFLs—read package labels carefully. Bulbs that are not designed for totally enclosed fixtures will state that on the package.

Chandelier: Choose dimmable halogens. Conventional incandescent candelabra bulbs are exempt under the new law, but halogens will last three times as long.

“LED lighting today is like the Wild West—many companies are making false claims about brightness, and are getting away with it.”
Brett Sharenow,
CFO and CSO for Switch Lighting

Back to Top

Comments from DIY Community Members

Share what's on your mind and see what other DIYers are thinking about.

1 - 3 of 3 comments
Show per page: 20   All
zar

August 20, 3:32 AM [GMT -5]

good article!
Indeed the filament lamp is already outdated, but under her glare so comfortable ...
should give information about induction lamps, I read about them here: http://www.arsenal-a.com.ua/products/indukcionnoe-osveshchenie.html

May 03, 6:16 AM [GMT -5]

@duftech please.... I'm all for "we the people" etc etc... but that's like saying you reserve the right to purchase 8 tracks and reel-to-reels whenever and wherever you please.... It's moving with the times and technology more than it is a matter of choice of purchase.

May 01, 7:59 PM [GMT -5]

when will "we the people" change the dim bulbs in Washington and take back our constitution. i as a consumer should be allowed to purchase what ever light bulb i need.

+ Add Your Comment
closeX

Add Your Comment

Energy Act Requires New Light Bulbs to Conserve Energy

Please add your comment
closeX

Log in to My Account

Log in to enjoy membership benefits from The Family Handyman.

  • Forgot your password?
Don’t have an account yet?

Sign up today for FREE and become part of The Family Handyman community of DIYers.

Member benefits:

  • Get a FREE Traditional Bookcase Project Plan
  • Sign up for FREE DIY newsletters
  • Save projects to your project binder
  • Ask and answer questions in our DIY Forums
  • Share comments on DIY Projects and more!
Join Us Today
closeX

Report Abuse

Subject
Reasons for reporting post

Free OnSite Newsletter

Get timely DIY projects for your home and yard, plus a dream project for your wish list!

Follow Us