• Share:
Water Softener Problems

Fix a problem with a water pressure drop and clogged plumbing fixtures. It may be that your water softener needs to have its resins replaced. Here's how to diagnose your problem.

By the DIY experts of The Family Handyman Magazine

Water Softener Problems

If you have city water and your water pressure has dropped and your showerheads are clogging, you may be wondering if the problems are caused by your water softener.

To troubleshoot, first check with your city’s water department to see if there’s been a change in water pressure. However, since your showerheads are clogging, either mineral deposits broke free inside your pipes or the resins in your water softener need to be replaced. Remove your showerhead and turn on the water. If the water is clear, the problem was mineral deposits. Clean the showerhead and any clogged faucet screens. If, however, you see any sand-like particles in the water, most likely you need to replace the resins. Don’t confuse the resins with the salt you put in the tank; see Figures A and B. Resins break down over time and get into the water line, clogging showerheads and faucet screens. Once this starts, don’t wait. Fragmented resins (called “fines”) can damage water heaters and plumbing fixtures. Close the valves to the water softener and open the bypass valve. Then ask a water softener service company to inspect the resins and replace them if necessary. Some companies install a new resin tank ($200 to $250).Others clean and refill yours with new resins. You won’t save much if you try to do it yourself, so let the pros handle this. Resins can last 20 years (the lifespan for most water softeners), but chlorinated city water can damage resins in fewer than 10 years.

How a standard water softener works.

How a standard water softener works.

Figure A: Water Softening

Resins remove various minerals from water and replace them with sodium.

How the backwash and recharge function works.

How the backwash and recharge function works.

Figure B: Backwash and Recharge

First, water washes the resins (1). Then a salt solution from the brine tank recharges the resin bed with sodium (2).

Back to Top

Comments from DIY Community Members

Share what's on your mind and see what other DIYers are thinking about.

1 - 2 of 2 comments
Show per page: 20   All

May 15, 11:08 AM [GMT -5]

I would like to change out the resin/zeolite of my aging water softener. What grain of zeolite would I use?

January 15, 10:07 PM [GMT -5]

I am having very low water pressure, I thought maybe replacing the resin would help.

+ Add Your Comment

Add Your Comment

Water Softener Problems

Please add your comment

Log in to My Account

Log in to enjoy membership benefits from The Family Handyman.

  • Forgot your password?
Don’t have an account yet?

Sign up today for FREE and become part of The Family Handyman community of DIYers.

Member benefits:

  • Get a FREE Traditional Bookcase Project Plan
  • Sign up for FREE DIY newsletters
  • Save projects to your project binder
  • Ask and answer questions in our DIY Forums
  • Share comments on DIY Projects and more!
Join Us Today

Report Abuse

Reasons for reporting post

Free OnSite Newsletter

Get timely DIY projects for your home and yard, plus a dream project for your wish list!

Follow Us