• Share:

Comments from DIY Community Members

Share what's on your mind and see what other DIYers are thinking about.

1 - 2 of 2 comments
Show per page: 20   All

May 16, 10:50 PM [GMT -5]

When removing old facets you frequently encounter the facet being attached with larger plastic nuts. These are often difficult to remove with a facet wrench. Using a piece of 1 1/2 PVC approximately 18 inches long and cutting notches in one end will allow you to use the PVC as a facet wrench and is much easier to use.

April 20, 9:32 PM [GMT -5]

A tip from the Pro's When installing the new wasteline / drain use plumbers putty it is much more forgiving then silicone which can get messy. And when you are instaling the drain plug make sure you put the drain plug tip with the hole facing the pivot rod. This will prevent the plug from slipping off when in the full up or down position. Also do not over tighten the rubber gaskit that is the one between the drain assembly and the bottom of the sink, it will leak if you do. Just snug it a little at a time until you get no leaks.

+ Add Your Comment
closeX

Add Your Comment

How to Replace a Faucet and Waste Line

Please add your comment
closeX

Log in to My Account

Log in to enjoy membership benefits from The Family Handyman.

  • Forgot your password?
Don’t have an account yet?

Sign up today for FREE and become part of The Family Handyman community of DIYers.

Member benefits:

  • Get a FREE Traditional Bookcase Project Plan
  • Sign up for FREE DIY newsletters
  • Save projects to your project binder
  • Ask and answer questions in our DIY Forums
  • Share comments on DIY Projects and more!
Join Us Today
closeX

Report Abuse

Subject
Reasons for reporting post

Free OnSite Newsletter

Get timely DIY projects for your home and yard, plus a dream project for your wish list!

Follow Us