• Share:
How to Clean and Repair a Clogged Faucet

Aerators are found on almost every kitchen and bath faucet, and if water flow slows or becomes uneven, clogs inside the aerator are usually the cause. Fortunately it’s an easy problem to fix.

By the DIY experts of The Family Handyman Magazine

Remove the aerator

If the flow from your kitchen or bathroom faucet isn’t what it used to be, the aerator is probably plugged. An aerator can clog slowly as mineral deposits build up, or quickly after plumbing work loosens debris inside pipes. Usually, a quick cleaning solves the problem. Remove the aerator (Photo 1) and disassemble it. You may need a small screwdriver or knife to pry the components apart. Scrub away any tough buildup with an old toothbrush (Photo 2) and rinse each part thoroughly. Gunk can also build up inside the faucet neck, so ream it out with your finger and flush out the loosened debris.

If the mineral buildup resists scrubbing and you have a standard cylinder-shaped aerator, you can replace it. Take your old aerator along to the home center or hardware store to find a match. If your aerator has a fancy shape (like the one shown here), finding a match won’t be as simple. So try this first: Soak the aerator parts in vinegar overnight to soften mineral buildup. If that doesn’t work, go to any online search engine and type in the brand of your faucet followed by “faucet parts.” With a little searching, you can find diagrams of your faucet and order a new aerator.

Back to Top

Required Tools for this Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

    • 4-in-1 screwdriver
    • Adjustable wrench
    • Slip joint pliers
    • Utility knife

You'll also need an old toothbrush

Required Materials for this Project

Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.

    • Vinegar
    • Electrical tape

Comments from DIY Community Members

Share what's on your mind and see what other DIYers are thinking about.

1 - 1 of 1 comments
Show per page: 20   All

January 19, 11:21 AM [GMT -5]

Rather than replace your old aerator, soak it in a shallow dish of plain white vinegar after you remove it from the faucet. Vinegar will loosen the mineral build-up and after 15 minutes (or longer), the crud will be left in the dish or it'll be easy to remove w/ an old toothbrush. Rather than remove an old shower head, put some plain white vinegar into a plastic sandwich baggie and put it on the shower head so the holes rest in the vinegar. Tie the baggie on behind the shower head w/ a rubber band & leave it for abt an hour. Remove baggie & turn on shower; voila! the crud will fall away and you'll enjoy better water flow for bathing.

+ Add Your Comment

Add Your Comment

How to Clean and Repair a Clogged Faucet

Please add your comment

Log in to My Account

Log in to enjoy membership benefits from The Family Handyman.

  • Forgot your password?
Don’t have an account yet?

Sign up today for FREE and become part of The Family Handyman community of DIYers.

Member benefits:

  • Get a FREE Traditional Bookcase Project Plan
  • Sign up for FREE DIY newsletters
  • Save projects to your project binder
  • Ask and answer questions in our DIY Forums
  • Share comments on DIY Projects and more!
Join Us Today

Report Abuse

Reasons for reporting post

Free OnSite Newsletter

Get timely DIY projects for your home and yard, plus a dream project for your wish list!

Follow Us