Repair a leak around a faucet stem by tightening the packing nut or replacing the packing washer. Both are simple fixes.
By the DIY experts of The Family Handyman Magazine:September 2007
A new rubber washer under the packing nut usually fixes leaks around the stem and handle.
If a faucet leaks around the handle, you either have a loose packing nut or a bad packing washer. First try
tightening the nut with a wrench or pliers. (The size and type of nut varies
a bit with faucet styles.) If the nut is tight but the leak persists, shut off the water
to the faucet inside the house, remove the faucet handle from the outside faucet
and unscrew the nut. You should be able to pull off the old packing washer and
take it to a hardware store to find an exact replacement. Older faucets may have
a wad of string, called valve packing, instead of a packing washer. If so, pick up
new packing (graphite-coated string) at the hardware store, unwind the old packing
and wind on the new clockwise. The packing nut should compress it tightly.
You may have to wind on one layer, tighten the nut and then repeat the process
to fill the space around the stem completely with packing string.
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.
Copyright © 2014 The Family Handyman. All Rights Reserved.