Lo-tech but extremely effective, a peephole let's you see who's on the other side of the door – before you open it. Installation is simple. Here's how to do it, no matter what type of entry door you have.
By the DIY experts of The Family Handyman Magazine:July / August 2005
A peephole allows you to see who's knocking before unlocking.
Peepholes come in two parts. Drill the hole, insert the lens from the inside and the sleeve from the outside, then screw them together.
As sturdy deadbolts and reliable window locks have become more common, some crooks have learned that the easiest way to get into a house is to ring the doorbell. So never open the door unless you know who's on the other side. If you don't have windows that let you see who's knocking, install a peephole. Standard peepholes are inexpensive, and are sold at home centers and hardware stores. Installation takes less than 15 minutes, whether your door is wood, steel, fiberglass or a composite material. For a splinter-free hole through a wood door, use a brad point bit. With metal, fiberglass or composite doors, use a standard bit. Run the drill at full speed and press lightly—that creates a clean hole through the outer skin and inner foam core. Most peepholes require a 1/2-in. hole.
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
You'll also need a 1/2-in. brad point drill (for wood doors) or a standard 1/2-in. high-speed steel bit (for metal, fiberglass or composite doors).
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.
Copyright © 2015 The Family Handyman. All Rights Reserved.