To replace a rail in a split rail fence you have to first dig out a post so you can slip in the new rail. We show you how.
By the DIY experts of The Family Handyman Magazine:December / January 2008
Dig to the bottom of one side of the post that holds the rotted rail.
Lift the post out of the ground and remove the old rail.
With the new rail in place, set the post back into the hole and tamp the dirt back in around it.
Split rail fences are sturdy and long lasting, but occasionally pieces need to be replaced because they're
broken or rotted. Rails and posts are available in stock or can be ordered at lumberyards
and home centers.
To remove a rail, first mark the bottom of one of the posts with masking tape so you can return it to the proper depth. Dig out the post (Photo 1).
Pull out the damaged rail (Photo 2), then set the new piece into the slots and lower the post back into the hole (Photo 3). Hold the post at the right height and line it up with the other posts as you pack
the soil down.
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
You'll also need a shovel.
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.
Copyright © 2014 The Family Handyman. All Rights Reserved.