How to Repair a Chain Link Fence

Save money with this simple DIY repair

A damaged chain link fence rail can easily be repaired by cutting out the bad section and sliding in a new piece. Learn how from our fence experts.

By the DIY experts of The Family Handyman Magazine

Repair a bent fence rail

When a tree limb falls on your property, you can bet it's going to damage something. And if that “something” happens to be a chain link fence, consider yourself lucky, because fixing a chain link fence is an easy DIY repair. The pros would charge about $150 plus materials for the repair shown here. But you can do it yourself for about $60, including tool rental.

We asked our friends at Premier Fence in St. Paul, MN, to evaluate the damage on this fence and walk us through the repair. Here's how to proceed.

Get a new section of top rail and some wire ties from a home center or fence supplier. The top rail should have one open end and one crimped end. Grab a hacksaw, file and pliers—and a helper.

Start by removing the wire ties that hold the fence fabric to the top rail. Then rest the new rail on top of the damaged rail and have your helper hold it in place while you mark a cutting line on the old rail. Then mark a cut on the opposite end of the new rail where it meets a joint.

Cut the damaged rail at the cutting line (Figure A), slide it off the joint and toss it. Then cut the excess off the top rail to mate with the existing joint. Create some maneuvering room by unbolting the top rail from the corner post and sliding it away from the damaged area. Install the larger end of the new rail onto the crimped end of the old rail. Then make the final connection. Reconnect the rail end cap to the corner post.

Meet the Pros

Chris and Wayne work for Premier Fence in St. Paul, MN. Between the two of them, they have more than 27 years of experience installing and repairing wood, aluminum, iron, chain link and vinyl fencing.

Experienced fence builders share repair tips
Back to Top

Required Tools for this Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

  • Adjustable wrench
  • Extension cord
  • File
  • Hearing protection
  • Pliers
  • Reciprocating saw
  • Safety glasses

Required Materials for this Project

Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.

  • Chain link fence rail
  • Galvanized wire ties