• Share:
Garage Storage Solutions: One-Weekend Wall of Storage

This DIY garage storage system has the versatility of expensive store-bought systems, but you can make it yourself for a few hundred dollars in a single weekend.

By the DIY experts of The Family Handyman Magazine

Get more storage for less

You can drop a lot of cash on garage storage systems. Shelves, tool racks, special hooks, and other odds and ends can really add up. Our homemade system gives you the versatility of those store-bought systems without the big price tag. Our materials cost for the whole system you see here, covering 16 ft. of wall, was only a few hundred dollars. It’ll be even cheaper if you have scrap plywood and other common materials lying around.

This system is so simple and fast to build that even a beginning DIYer can complete it in a weekend. You’ll find everything you need at home centers or hardware stores. And the system is completely customizable to your specific garage and gear—you can easily move or add accessories by driving in a few screws. Transform your cluttered garage into one so organized you’ll be the envy of the neighborhood.

Start with struts

Each of these storage accessories hangs from a simple framework of vertical struts, which are just 2x2s screwed to the garage wall studs. If you use struts, you can hang something on the wall without hunting for studs, and you can screw shelf brackets and accessory hangers to the sides of them. Of course, if you have bare stud walls, you can skip the struts. We used 2x2s rather than 2x4s because they cost slightly less and have fewer knots. Just be sure you screw them in every 16 in. for extra strength. Home centers sell 2x2s in 8-ft. lengths.

Shorten or lengthen the struts to suit your garage. If you go with 6-footers like we did, you can use the leftover 2x2 scraps to build some of the accessories described in this article. It doesn’t matter if the struts are centered 16 in. or 24 in. apart. Just make sure they’re plumb by using a level.

Yard tool rack

Weed trimmers and leaf blowers can slide around if you prop them in a corner, and fall off the wall if you try to hang them from a hook. Solve the problem with this custom storage rack, which uses 3/4-in. plywood for the brackets, top and back. Cut two 8-in. x 11-in. brackets to support the top and back of the rack. Our rack is 34 in. long and 12 in. deep—customize the dimensions to fit your yard tools. To determine the best shape for your slots, measure the diameter of your tools and cut basic slots in the top of the rack. Then play with the shape of your slots to get a snug fit.

Shelf brackets

Metal shelf brackets seem inexpensive, but the cost can add up quickly if you’re installing several shelves. So why not make free brackets from plywood scraps? We created a simple, flexible and inexpensive shelving system using 3/4-in. plywood brackets screwed to the vertical framework. We used 3/4-in. plywood rather than 1/2-in. because it gives you a wider surface to screw into when attaching the shelves to the brackets.

For shelves, we used 3/4-in. birch plywood, but you could use 1x12s or melamine-coated particleboard, or you could edge-band the plywood for a more finished look. Screw a bracket at each strut to support the shelves. You can put shelving across the entire length of the wall or stack shorter shelves on top of each other (or do both, as we did).

Vinyl gutter storage bins

Ten-foot lengths of vinyl gutter (sold at home centers) screwed to the 2x2 framework are a perfect place to store long items like hockey sticks, fishing rods, dowels, wood trim and corner bead. Items like these often end up leaning against a wall or taking over an entire corner only to tumble over or get wrecked because they’re not really supposed to be stored on end.

Shorter sections of vinyl gutter and sturdy window box liners (sold at home and garden centers) attached the same way work well for storing hard-to-hang items like gloves, hose nozzles, fertilizer spikes and sprayers. And people who refuse to hang stuff back up on the wall can just toss it into the bin. If the gutter end caps don’t fit snugly, apply PVC cement, silicone or gutter adhesive and press firmly.

Vinyl gutters are surprisingly sturdy—you can even store a few sections of rebar and metal pipe in them without a problem. Metal gutter is also an option. It’s the same price, but it’s harder to cut and too flimsy for heavier items.

Long-handled tool storage

Typical brackets for storing long-handled tools stack the tools one on top of another. This is definitely an efficient use of wall space, but it’s frustrating to move other tools out of the way to reach the one you’re after. Or you end up devoting an entire wall to hooks that hang individual items.

Here’s a better solution. Screw a pair of 3/4-in. plywood brackets to a chunk of scrap 2x2. Attach several 16d finish nails to the side of each bracket and screw the bracket assembly to the 2x2 framework. Drill holes into each of your tool handles, and you can easily hang and retrieve individual rakes and shovels without using up a lot of wall space.

Wheelbarrow storage hub

Here's a slick way to get your wheelbarrow off the garage floor: To start, screw two plumbing hooks to the wall (we used 1-1/2-in. hooks). Tilt the wheelbarrow onto the hooks and up against the wall. Drill a pilot hole and then drive in a screw hook to hold the wheelbarrow upright. To release the wheelbarrow, just turn the hook.

Kid-friendly ball corral

This sturdy ball corral holds a herd of balls and lets kids easily grab the balls at the bottom without unloading all the ones on top. It’s built from 3/4-in. plywood and 2x2s. We made our ball corral 24 in. wide x 33 in. high x 12 in. deep.

The hooks on Bungee cords can be a safety hazard for kids and adults alike. So cut the hooks off the cords (or use elastic cord available at camping, sporting goods and hardware stores). Thread the cord through predrilled holes and secure with knots. Drill the holes slightly larger than the cords to make threading them easier.

We added plumbing hooks and short gutter troughs on the outside of the corral to make it easy for kids to stash smaller balls, helmets and mitts.

Hose and sprinkler bucket

Storing hoses and cords on thin hooks or nails can cause them to crack or lose their shape. Five-gallon buckets fitted with a scrap of 3/4-in. plywood in the bottom and then screwed to the wall make great multipurpose holders. The plywood can be any shape, but to give it a more finished look, cut a circle slightly smaller than the diameter of the bucket.

Sports gear rack

Specialty gear hooks and bat racks are expensive, and while vinyl-covered utility hooks only cost a few dollar, they only hold single items. Each of these inexpensive sports gear hangers will hold several bats and racquets.

Each set of hangers is made from a pair of lag screws covered with CPVC sleeves to protect the gear. Customize the hangers by spacing them closer or wider apart depending on what you want to hang.

Back to Top

Required Tools for this Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

    • Hammer
    • Miter saw
    • Cordless drill
    • Circular saw
    • Socket/ratchet set
    • Countersink drill bit
    • Level
    • Drill bit set
    • Jigsaw
    • Nut driver
    • Utility knife

Required Materials for this Project

Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.

    • 2x2s
    • 3/4-in. plywood
    • 3-in. screws
    • 1-5/8-in. screws
    • Plumbing hooks
    • Vinyl gutter and end caps
    • 16d finish nails
    • Screw hook
    • Bungee cords
    • 5-gallon bucket
    • 8 in. x 3/8-in. lag screws
    • 1/2-in. CPVC pipe

Comments from DIY Community Members

Share what's on your mind and see what other DIYers are thinking about.

1 - 6 of 6 comments
Show per page: 20   All

September 10, 10:21 AM [GMT -5]

About the plywood brackets, does the part that attaches to the 2x2s need to be a certain length? Is there a ratio between this part and the part holding the shelf?

Also, how long can the brackets go before you have to make them wider? I am planning 21 inch shelves.

April 09, 1:21 PM [GMT -5]

I need to build an inexpensive shoe rack (wish I could underline the word inexpensive here).

I put the 2x2 on the studs, then screwed the scrap 2x2 pieces on the sides of the 2x2 already on the wall to build supports for a wire rack. I can now store about 30 pairs of shoes and boots on the three tier rack. Total cost was about $25 in SW PA.

Next, I will attempt shelving. The Rub....aid shelving system sold in stores is way to expensive for my taste.

Yes, I'm cheap and proud of it.

September 20, 11:54 AM [GMT -5]

Great project , I have started it but was wondering what size bungee cord did you use.

Thanks

June 28, 1:31 PM [GMT -5]

I'm interested in this project. I'm wondering the size, length, type of screw, etc., needed for the project - not mentioned in the magazine or in the materials list.

Thanks

Dave

June 20, 11:08 PM [GMT -5]

This is an excellent, flexible inexpensive storage system. I bought 2 x 2 verticals. I picked up scraps of plywood from construiction sites and cut them for the shelf supports. I found several boards and cut up a 4 x 8 MDX sheet for shelves. For hooks I used 1/2 inch dowels. Etc., etc.

The result is enough storage for most of the junk in my garage. I will continue to add to this system as I find materials. There is alwyas need for more storage space.

May 17, 12:20 AM [GMT -5]

Great Idea - I have looked at those expensive wall hanging systems saying there must be a way to do this for less.

+ Add Your Comment
closeX

Add Your Comment

Garage Storage Solutions: One-Weekend Wall of Storage

Please add your comment
closeX

Log in to My Account

Log in to enjoy membership benefits from The Family Handyman.

  • Forgot your password?
Don’t have an account yet?

Sign up today for FREE and become part of The Family Handyman community of DIYers.

Member benefits:

  • Get a FREE Traditional Bookcase Project Plan
  • Sign up for FREE DIY newsletters
  • Save projects to your project binder
  • Ask and answer questions in our DIY Forums
  • Share comments on DIY Projects and more!
Join Us Today
closeX

Report Abuse

Subject
Reasons for reporting post

Free OnSite Newsletter

Get timely DIY projects for your home and yard, plus a dream project for your wish list!

Follow Us

Featured Product

Buy Now