• Share:
How to Make Safe Wire Connections

Making tight electrical connections is critical to a safe wiring job. If wires come loose, you could get arcing and overheating, which could lead to a fire, However, thanks to reliable connectors and terminals, it's fairly easy to make safe, strong connections. But there are a few things you have to watch out for. We'll show you how to pick the right connector for the job, and how to prepare the wires for the best connection. We'll also show why you should spend a little extra money when it comes time to buy outlets and other devices. With careful attention to detail, you can rest easy knowing your wiring job is as safe as you could possibly make it.

By the DIY experts of The Family Handyman Magazine

Choose a connector that fits the wires

Every wire connector is made to join a certain minimum and maximum volume of wires: The larger the wire gauge, the fewer it can hold. Always check the approved list on the packaging (photo above) to make sure the connector is listed for the wire combination you want to join. Even though the connectors appear to be color coded, you can't rely on this. For example, one style of yellow connector joins up to four 14-gauge wires, while another connects a maximum of three. You have to check the label on the package or go to the manufacturer's Web site to find out. Keep a range of small to large connectors and their packaging on hand so you won't be tempted to make do with the wrong size.

Line up the wire ends, then tighten

With the exception of stranded wire, which we'll talk about below, it's important to make sure the ends of all wires are lined up before twisting on the connector. Otherwise the connector won't clamp all wires evenly and one or more could slip out.

Start by stripping the ends of the wires. Check the label on the connector package for the length of bare wire to expose. For all but the smallest and largest connectors, this is usually about 1/2 to 5/8 in. Then arrange the wires parallel to each other with their ends aligned. Keep your eye on the wire ends until the connector covers them to make sure none slips out of position. You don't have to twist the wires together before you screw on the connector. Simply twist the connector until the insulated wires outside the connector begin to twist. Photos 1 and 2 below show how to install the connector. When you're done, tug on each wire to make sure they're all firmly connected.

Buy a wire-stripping tool

Wire-stripping tools do a fast, clean job without nicking and weakening the wires. For most standard house wiring requiring 12-gauge and 14-gauge plastic sheathed cable, I like the Klein No. 1412 stripper ($18) shown here. It can cut the plastic sheathing of 12-2 and 14- 2 plastic sheathed cable, as well as strip insulation on individual wires.

Extend stranded wire 1/8 in. beyond solid wire

If you hold the ends of solid and stranded wire even with each other while you screw on the connector, the stranded wire will often wrap loosely around the solid wires, resulting in a loose connection. This is especially likely when you're joining multiple solid wires to one stranded wire. The problem is easy to prevent by extending the ends of all stranded wires about 1/8 in. beyond the solid wires. Then install the connector as usual.

Tip:

Stranded wire is a little larger than the same gauge of solid wire. Use a wire stripper labeled for stranded wire, or use the hole for the next largest gauge of solid wire. Remember to tug on each wire to make sure the connector has a solid grip.

Loop the wire for a strong screw connection

Since switches and outlets vibrate a little when used, it’s critical that the connections to them be strong so they don’t work loose. For screw connections, start with a 3/4-in. length of bare stripped wire. Photos 1 and 2 show how to bend the loop and close it around the screw. Wrap the wire clockwise around the screw so that the loop closes as the screw is tightened. Make sure to tighten the screw firmly. Keep in mind that only one wire is allowed under each screw.

Cut off nicked, bent or twisted ends

Wires that are bent, twisted or nicked are weaker and won't nest together as easily in the connector. Before you reconnect wires to an outlet or switch, or rejoin several wires with a connector, cut off the old bare wire ends and strip the insulation to expose clean, straight wire. It takes a few extra seconds but ensures a better connection.

Tip:

If cutting a wire leaves it too short to work with easily, splice on an additional 6-in. length with a wire connector

Buy top-quality outlets for the best connections

At most home centers, you can buy an economy outlet for about 50¢ or you can spend about $1.75 for a better one. That's a big jump in cost for something that looks similar and does the same job. It’s tempting to buy the cheap one. But you get what you pay for. Premium outlets are stronger, make better contact with plugs and work more smoothly. Cheap outlets can literally wear out if you use them frequently. If you decide to buy premium outlets, look for the kind with clamp screw terminals (Photo 1). They resemble the "stab-in" holes you'll find on economy outlets but actually clamp down firmly when you tighten the screw. If you don’t want to spend the extra money to install premium outlets everywhere, at least put them in heavy-use areas like kitchens, garages, workshops and laundry rooms. Some of these areas may require GFCI protection. Always check with your local electrical inspector before replacing outlets.

Strip the wires to the length shown on the stripping gauge (Photo 2). Loosen the terminal screw by turning it counterclockwise to open the clamp. Then hold the wire or wires, one in each hole, while you tighten the screw. Tug on the wires when you're done to make sure they're securely connected.

Back to Top

Required Tools for this Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

    • 4-in-1 screwdriver
    • Wire stripper/cutter

Required Materials for this Project

Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.

Wire connectors in a variety of sizes

Comments from DIY Community Members

Share what's on your mind and see what other DIYers are thinking about.

1 - 3 of 3 comments
Show per page: 20   All

March 30, 5:16 PM [GMT -5]

I wish Handyman would stop telling people that they don't need to twist wires together before putting a wire nut on. The only time it's acceptable for an electrician to do this is when they have carpal tunnel or arthritis. A good mechanical connection insures a god electrical connection. And also when you take the wire nut off, most people expect the wires to be twisted, so it's not a big deal working the circuit hot. But when the wires aren't twisted together, they spread apart as soon as the wire nut comes off. I've shorted out more than one surge protector when working a circuit hot and the hots or neutrals spring apart like that.

May 21, 1:30 PM [GMT -5]

mikemethven is correct - and that is the way I always do the wiring as it does provide more wire-to-wire contact. If you read the instructions with the wire nut it doesn't say to twist the wires together.

September 02, 3:37 PM [GMT -5]

As an electrician we advise that you should twist solid wires together with pliers so they look like a braided rope to ensure they won't separate while twisting on the connector

+ Add Your Comment
closeX

Add Your Comment

How to Make Safe Wire Connections

Please add your comment
closeX

Log in to My Account

Log in to enjoy membership benefits from The Family Handyman.

  • Forgot your password?
Don’t have an account yet?

Sign up today for FREE and become part of The Family Handyman community of DIYers.

Member benefits:

  • Get a FREE Traditional Bookcase Project Plan
  • Sign up for FREE DIY newsletters
  • Save projects to your project binder
  • Ask and answer questions in our DIY Forums
  • Share comments on DIY Projects and more!
Join Us Today
closeX

Report Abuse

Subject
Reasons for reporting post

Free OnSite Newsletter

Get timely DIY projects for your home and yard, plus a dream project for your wish list!

Follow Us