• Share:

Comments from DIY Community Members

Share what's on your mind and see what other DIYers are thinking about.

1 - 3 of 3 comments
Show per page: 20   All

July 14, 10:33 AM [GMT -5]

Used this design to make our yard light post. Look great!

August 19, 10:17 AM [GMT -5]

When I had to run low voltage wire under a 4 foot section of sidewalk, I didn't use a sledge hammer, but a water hose.

I put the end of the hose at the end of a piece of conduit, turned the water on medium high, and just pushed the conduit through the dirt, with the water pushing everything out of the way.

Sure things were a little muddy, but I only had to tear up around 2 square feet of lawn grass and a square foot or so of flower bed on the other end to find the pipe. Since I was just running LV wire I just pulled the pipe back out after I ran the wire.

August 16, 5:08 PM [GMT -5]

Why not use 12/2 and have it available for other additions. I did and later added a motorized gate.

+ Add Your Comment
closeX

Add Your Comment

How to Install Outdoor Lighting and Outlet

Please add your comment
closeX

Log in to My Account

Log in to enjoy membership benefits from The Family Handyman.

  • Forgot your password?
Don’t have an account yet?

Sign up today for FREE and become part of The Family Handyman community of DIYers.

Member benefits:

  • Get a FREE Traditional Bookcase Project Plan
  • Sign up for FREE DIY newsletters
  • Save projects to your project binder
  • Ask and answer questions in our DIY Forums
  • Share comments on DIY Projects and more!
Join Us Today
closeX

Report Abuse

Subject
Reasons for reporting post

Free OnSite Newsletter

Get timely DIY projects for your home and yard, plus a dream project for your wish list!

Follow Us