Learn how to get the best cutting results from your hacksaw. Hacksaws are designed to cut in one direction, and reversing the blade will decrease the cutting speed.
By the DIY experts of The Family Handyman Magazine:February 2008
Install the hacksaw blade so the teeth face forward.
The saws are designed so the blade will cut when it's pushed (the forward stroke) rather than when pulled
(see photo). Some blades have an arrow that shows the correct installation (the arrow points toward the handle).
Install the blade so it's tight in the saw and won't bend. When you do a lot of cutting, the blade will heat up and
expand, so be sure to tighten it if it starts to bend.
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.
Copyright © 2013 The Family Handyman. All Rights Reserved.