Need to finish a lot of trim or woodwork? Instead of spreading it out over the whole garage to dry, set it on a vertical drying rack. One rack can dry as much as a few hundred feet, yet only take up a narrow strip of floor space.
By the DIY experts of The Family Handyman Magazine:March 2010
Hammer 16d finish nails into the 2 x 4s just deep enough so they'll hold the trim without bending.
Have a whole bunch of trim to finish? This rack is easy to set up and takes
up hardly any floor space—and it holds so much
that you can finish all your trim at once.
All you do is pound 16d nails about 6 in. apart
into 8-ft.-long 2x4s and screw the 2x4s to the wall.
No open wall space? Clamp them to your garage
door track. Just make sure you unplug the opener!
There's your drying rack. Slather on the stain, varnish,
paint, whatever—and then rest the pieces on
the rack until they're dry.
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.
Copyright © 2013 The Family Handyman. All Rights Reserved.