Project Detail

INCLUDE CONTENT		PRINT OPTIONS
Summary Step by Step Tools & Materials List	User Comments Select Comments	Print Images	« Return

INCLUDE CONTENT		PRINT OPTIONS
User Comments		Print Images
Select Comments

How to Fix a Noisy Vent Hood Damper

Add-on dampers stop the noise

A pair of spring-loaded dampers almost always stop the damper clanging in a kitchen range hood vent cap.

By the DIY experts of The Family Handyman Magazine:July/August 2011

Stop vent clanging with dampers

1 of 1

Range hood vent system

The vent hood ducts through a rigid or flexible pipe to a cap on the roof or side of your home.

Often a stiff wind will open vent dampers, causing them to periodically clang shut. If the noise drives you crazy, new spring-loaded backdraft dampers ($9 to $30, depending on the size) should solve the problem. Measure the diameter of the vent pipe and order the dampers from a duct supply company (hvacquick.com is one source). Start by replacing the backdraft damper directly above the vent hood. If that doesn't solve the problem, install a second damper near the wall or roof discharge cap. The second damper will greatly reduce the clanging problem.

Tools & Materials List

Required Tools for this Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

Tape measure
4-in-1 screwdriver
Hacksaw

Required Materials for this Project

Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.

Backdraft dampers
Small sheet metal screws


	« Return