• Share:
Three Bathroom Storage Ideas

Here are three DIY friendly projects that will provide more storage for your bathroom, no matter how small it is. We’ll show you how to install a large medicine cabinet in the wall, add glass shelves over your toilet (or anywhere else you want them) and install built-in pantry cabinets. Whether you decide to upgrade your bathroom with one of these projects or all three, you’ll make your bathroom more functional.

By the DIY experts of The Family Handyman Magazine

Bathroom Storage

Bathrooms never have enough storage or shelf space. Where do you display knickknacks, let alone store unsightly items like extra toilet paper, blow dryers, curling irons, and cans, soaps and bottles? Once you've filled up the vanity, how do you squeeze more storage into a small bathroom?

Three solutions:

1. Upsize existing storage space by replacing that tiny medicine cabinet or mirror with a larger, surface-mounted cabinet.

2. Utilize the space you have by adding glass shelving to the “dead” space over the toilet.

3. Steal space from an adjoining room or closet by insetting kitchen pantry cabinets (or tall utility cabinets) into the wall.

Installing a new medicine cabinet and shelving is easy and fast. Each project takes less than an hour. For these simple projects, you'll only need a screw gun and a 2-ft. level. We'll show you a foolproof way to solidly support the cabinets no matter what type of wall you have.

The flush-mounted pantry cabinets are more challenging because you have to cut into the wall and steal space from a neighboring room or closet. But don't worry. Our step-by-step photos will walk you through the cutting and fitting.

You'll need a drywall saw, a few 8-ft. 2x4s for cribbing (Photo 10) and a table and miter saw for trimming out the pantry cabinets. You can install the cabinets in one day, but allow another day for walling in the cabinet backs in the room or closet behind the bathroom.

Buying the Cabinets

You can find a wide variety of medicine cabinets and shelves at home centers and kitchen and bath specialty stores. When sizing a medicine cabinet, measure the space you have available behind your sink, both height and width. Keep a few inches away from existing light fixtures (unless you want to move them). Buy a cabinet that fits within those dimensions.

When sizing the larger kitchen pantry cabinet(s) to recess into the wall, look for 7-ft. tall, 15-in. wide cabinets to fit between the wall studs. If they're not in stock, you'll need to special-order them. We ordered the medicine cabinet and the pantry cabinets from the same company so the styles would match. Special-ordering also allows you a wider style selection. Expect to pay a minimum of $200 for a barebones, 7-ft. tall pantry cabinet or up to $1,500 for an upscale cherry unit with fluted glass doors like we show.

If you plan on storing linens, towels or larger items, you'll be happiest with 24-in. deep cabinets, but if the closet they project into is less than 24 in. deep, go with the 12-in. units or cut down the 24-in. ones. When you order your pantry cabinets, also order three matching, prefinished 8-ft. long, 1/4-in. x 2-in. mullion strips for trim around the outside (Photo 19). Also order an 8-ft. long, 3/4-in. x 2-in. filler strip to join the cabinets in the center (Photos 16 and 17). If you're buying unfinished cabinets, get unfinished boards of the same wood type in the millwork area at the store.

Project 1: A Bigger medicine cabinet

Surface-mounting a large medicine cabinet is simply a matter of centering it, leveling it and screwing it to the wall studs.

Your old cabinet may be surface-mounted or recessed into the wall cavity between the framing. Remove a recessed unit simply by opening the door, backing out the screws in the side of the cabinet and pulling it out of the recess. You may need to cut around it with a utility knife if it's caulked or painted in around the edges.

Have a helper support surface-mounted cabinets while you back out the screws, or if you're alone, screw a temporary 1x2 support ledger under the cabinet as we show in Photo 1 to hold it while you unscrew it from the wall. You may need to move or replace the lighting beside or above the old cabinet. Now's the time to do it.

Hold the new medicine cabinet against the wall and adjust it up and down until the height is a good compromise for your family members, then mark the bottom and set the cabinet aside. Use the mark to draw a level line for positioning the 1x2 ledger (Photo 1). Then follow the photo series for installation details.

Project 2: Glass shelves

Most bathrooms have one space you can count on for additional storage, and that's over the toilet. Open glass shelving is a great place to display decorative bathroom bottles or knickknacks.

There are zillions of glass shelving systems on the market. Follow the directions that come with the system for the installation details, but read on for help anchoring them to the wall because you probably won't have studs exactly where you need them. We used masking tape to avoid marking the walls.

Project 3: Built-in pantry cabinets

Most small bathrooms have a similar layout to the one we show; all of the plumbing is on one wall and the door usually swings against a blank wall. Often, there's a closet on the other side of the blank wall to steal space from. If you don't have a closet, you'll have to decide if you can give up 1 or 2 ft. of floor space in the other room and go to the trouble of framing, drywalling, taping, painting and trimming a false wall to conceal the unsightly cabinet backs.

You can either add one or two cabinets to a wall using the method we show. If you want to add more, it's better to reframe the entire wall. You'll need a full 14-1/2 in. wide stud space for each cabinet in the blank wall (that space will be expanded to 15-1/2 in. wide). It's easiest to go into the bathroom and find the studs with a stud finder to see how many 14-1/2 in. stud spaces are available.

When a bathroom backs against a closet, there are rarely electrical cables inside the wall. We show cutting an inspection hole to check for cables or other obstructions (Photo 8). You can usually reroute an electrical cable if there is one. If you have carpeting, unhook it from the tack strips and pull it and the padding back a couple of feet.

You'll have to cut them both around the cabinets (or false wall), then staple down the padding and push the carpet onto new tack strips when you're through with the project. Chop off the tack strip in front of the wall openings with a chisel and reuse it at the back of the cabinets.

Crib up the cabinets with overlapping 2x4s to establish the cabinet height (Photos 10 and 11). At a minimum, keep the bottom of the face frame 2-1/2 in. above the bathroom base trim. That way you won't have any trim or tile work to hassle with inside the bathroom. If you use shorter cabinets, adjust the height for convenience and the best appearance.

Finish the cabinets

Finishing around the cabinet backs is optional if they're in a closet. You can build a separate wall (Photo 20) or put drywall directly against the cabinet backs. If you lay drywall against the cabinets, don't use screws or nails because they'll penetrate the cabinet backs. Instead, glue the drywall to the cabinet backs with construction adhesive and use paper-flanged corner beads that you tape on instead of nail.

To minimize taping, stand the drywall sheets upright so you won't have seams to tape. Cut the drywall to fit tightly into existing drywall at walls and the ceiling and caulk those seams with paintable caulk. That way you'll only have to tape and sand the corner beads for painting.

Tip:

Sometimes a stud will bow in the center. If it bows toward the opening, push it into position and hold it there by running drywall screws through the drywall into the stud.

Tip:

Check the existing doorstop to make sure the knob doesn't hit the new cabinets. If a standard stop isn't adequate, use hinge or floor-mounted stops.

Additional Information

Back to Top
closeX

Add Your Comment

Three Bathroom Storage Ideas

Please add your comment
closeX

Log in to My Account

Log in to enjoy membership benefits from The Family Handyman.

  • Forgot your password?
Don’t have an account yet?

Sign up today for FREE and become part of The Family Handyman community of DIYers.

Member benefits:

  • Get a FREE Traditional Bookcase Project Plan
  • Sign up for FREE DIY newsletters
  • Save projects to your project binder
  • Ask and answer questions in our DIY Forums
  • Share comments on DIY Projects and more!
Join Us Today
closeX

Report Abuse

Subject
Reasons for reporting post

Free OnSite Newsletter

Get timely DIY projects for your home and yard, plus a dream project for your wish list!

Follow Us