Removing a Trailer Hitch Ball

Remove a rusted trailer hitch with penetrating fluid and air power

Remove a rusted trailer hitch with penetrating fluid and an air chisel, not a sledgehammer. It's easier and won't bend or break anything.

By the DIY experts of The Family Handyman Magazine

Remove a rusted ball mount

When the ball mount on your trailer hitch is rusted in place, don't whack at it with a sledgehammer. Here's what to do instead. Buy a can of CRC Freeze Off penetrating spray and an air chisel fitted with a “hammer bit.” The air chisel will run about $15 and the extra bit will be about $8. Spray the opening to the hitch receiver. This newest style of penetrating fluid chills the metal, causing it to contract to help break the rust seal. Then use an air chisel fitted with a hammer bit to knock everything loose. The air hammer will break up the rust, spread the penetrant and free up the ball mount. Once it's free, just tap the rusted ball mount out with a hammer. If you plan to reuse the rusty mount, coat it with a rust converter or waterproof marine grease.

Back to Top

Required Tools for this Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

  • Hammer
  • Air compressor

You'll also need an air chisel and hammer bit.

Required Materials for this Project

Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.

  • Penetrating spray