Log in to enjoy membership benefits from The Family Handyman.
Sign up today for FREE and become part of The Family Handyman community of DIYers.
Member benefits:
Share what's on your mind and see what other DIYers are thinking about.
November 30, 5:51 PM [GMT -5]
Referring to benefit 10. The rail ends are NOT "Dead Square" care need to be take when joining guide rails. Basically there are two methods. one is done with a straight edge to make sure the guide rails are straight. Festool recommends a 2mm or so gap between the rail ends. The second way is called the bridge method. The bridge method used the TS55 saw bottom plate to align the guide rails. again maintaining the 2mm gap. Here is a post, from the Festool Owners Group, on the bridge method: http://festoolownersgroup.com/festool-how-to/joining-guide-rails-accurately/
Hello ScreenName My Account (Log Out)
Hello Log in or Join us
Get timely DIY projects for your home and yard, plus a dream project for your wish list!
