Log in to enjoy membership benefits from The Family Handyman.
Sign up today for FREE and become part of The Family Handyman community of DIYers.
Member benefits:
Share what's on your mind and see what other DIYers are thinking about.
February 05, 6:46 PM [GMT -5]
This is wonderful information! I'm wondering how to deal with butting up two tiles that aren't the same thickness. I've selected a porcelain wall tile that is 3/8" thick [it's a floor tile that I'm using on the wall]. I'm looking at floor tiles and like one that is 1/4" thick. How do you handle the butt when there's that much difference? Or should I only consider a floor tile that's much closer in thickness to the wall tile?
August 28, 2:15 AM [GMT -5]
Thanks for sharing these DIY Tips. Your tips are very comprehensive and helpful. It is cost effective and ill save to for my future needs.
October 11, 10:32 PM [GMT -5]
While installing 2" ceramic tile to our back splash in the kitchen, found out that I couldn't use the 1/8" spacers, all the time. The tile was glued to a fiberglass matt, and sometimes the spacers wouldn't line up properly. I just scored the fiber glass matt with a utility knife and then I could place the spacers properly
November 13, 1:28 PM [GMT -5]
I really like the entire design of this project. What tile did they use for the floor.
Hello ScreenName My Account (Log Out)
Hello Log in or Join us
Get timely DIY projects for your home and yard, plus a dream project for your wish list!
