Closet rod and shelf
This project will save you hours of ironing and organizing. Now you can hang up your shirts and jackets as soon as they're out of the dryer—no more wrinkled shirts at the bottom of the basket. You'll also gain an out-of-the-way upper shelf to store all sorts of odds and ends.
Just go to your home center and get standard closet rod brackets, a closet rod and a precut 12-in. deep Melamine shelf. Also pick up some drywall anchors, or if you have concrete, some plastic anchors and a corresponding masonry bit. Follow the instructions in Photos 1 and 2.
Get rid of that gross bar of soap that sits on the backsplash of your sink. Buy a soap dispenser at a home center and mount it to your acrylic tub. You'll need a drill, a 1-1/4 in. hole saw and liquid hand soap. Keep in mind you can put any liquid soap in the dispenser. A spot remover would be handy for prewash scrubbing.
Get those messy rags out of the sink and onto a towel bar so they can actually dry. Shop for an easy mounting towel bar that you can shorten if you like. We picked one up at the hardware store that had easy mounting holes right on the face of the mounting plate and a removable bar. We cut the bar with a hacksaw so it would fit nicely on the side of the sink. While you're at the hardware store, buy stainless steel mounting bolts, washers and acorn nuts to mount the bar. We used 7/8-in. No. 8-24 bolts.
Tired of moving all that stuff under the sink every time you mop the floor? Just buy a Melamine closet shelf from a home center and a length of suspended-ceiling wall angle (sorry, it only comes in 10-ft. lengths, but it's cheap and you can have it cut for transport). Also pick up four 1/2-in. No. 8-24 bolts, washers and nuts. Follow Photos 1 - 3.
Fold-away folding table
This 2 x 5-ft. table is a handy option for any laundry room. Located right across from the washer and dryer, it's the perfect place for sorting colors before washing and folding the clothes as soon as they're dry. We chose heavy-duty brackets that'll hold more than 100 lbs. and neatly fold the top down (preventing future clutter).
You can get the countertop (and end cap) at a home center or maybe you can salvage one from a friend who's getting new countertops. Also buy three 8-ft. pine boards—a 1x2, a 1x3 and a 1x4—as well as some wood screws. You'll need 1-1/4 in. and 2-1/2 in. wood screws for mounting the wall cleats and the countertop stiffeners. Follow Photos 1 - 6 for clear step-by-step instructions.
Back to Top
All-purpose wall cabinet
You can make that wall space above the washer and dryer into a valuable dust-free storage space by adding a utility wall cabinet. We chose a 54-in. wide, 24-in. high and 12-in. deep cabinet available at home centers. It's prefinished inside and out, so it'll be easy to clean.
Chances are, you'll have a dryer vent or some other obstruction right where you want your cabinet. To solve this problem, we simply cut away the back and inserted a 4-in. galvanized duct as a liner to give the cabinet a 1-in. clearance from the dryer vent, preventing heat from building up inside the cabinet. With the liner in place, the vent is isolated behind the cabinet, keeping everything inside cool and clean. Follow the step-by-step how-to in Photos 1 - 5.