Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
You'll also need a 1/4 in. brad point drill bit and a chamfer router bit.
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.
- Wall cabinets
- 1/4 plywood
- 3/4 plywood
- 1 in. x 6 in. x 8 ft. lumber
- 1 in. x 4 in. x 12 ft. lumber
- 1 in. x 6 in. x 8 ft. lumber
- 3-1/2 in. crown molding
- 1/2 in. quarter-round molding
- Door stop molding
- L-brackets
- Drywall anchors
- Shelf supports
- Screws (1-1/4 in., 1-5/8 in., 2-1/2 in. and 3-1/2 in.)
- Brad nails (1-1/4 in., 1-1/2 in. and 2 in.)
- Masking tape
You can print out a Shopping List that includes all of the materials and sizes you need. Look in "Additional Information."
