Log in to enjoy membership benefits from The Family Handyman.
Sign up today for FREE and become part of The Family Handyman community of DIYers.
Member benefits:
Share what's on your mind and see what other DIYers are thinking about.
May 01, 10:11 AM [GMT -5]
I'm no expert, so to ensure a level surface when building up the 1/2" of cement on the wire lath cut 1/2 strips of pine or plywood in whatever length you need, e.g. 6' or 8' is common. Attach them 16" or 24" apart with a finish nailer. This will guide you to make sure the first coat you put on is an even 1/2" all across the area you are covering.you can even use them to "screed" to 1/2: depth. When dry, remove the strips and fill in w/ the same mortar mix.
Hello ScreenName My Account (Log Out)
Hello Log in or Join us
Get timely DIY projects for your home and yard, plus a dream project for your wish list!
