Overview
Oil and grease stains don't just make a garage floor look bad— they can also cause falls, ruin your shoes and get tracked into the house. And if you want to finish your floor with a coating, it’s essential to get rid of oil deposits for a good bond. Solvent-based remedies are harmful to the environment and can damage the concrete surface. Cat litter, sawdust and other absorbent materials remove standing oil but do nothing about the oily stain left behind. Commercial and household detergents require a lot of scrubbing and can leave behind residue or discolor the concrete. Here are two product that actually work.
Getting rid of small spots
1 of 3
Photo 1: Spread the solution over the stain
To remove oil spots, make sure the concrete is dry and trowel on the Pour-N-Restore product 1 in. beyond the stain's perimeter. Let it dry to a powder, a process that can take eight hours or longer.
2 of 3
Photo 2: Let dry and sweep
Sweep up the powder once it's completely dry. Then allow all moisture to evaporate completely. If the product is used on sealed concrete, evaporation can take several weeks. If stain remains, repeat the application.
3 of 3
Small spot cleaner
Pour-N-Restore product. Good for small spots.
Pour-N-Restore, which combines a citrus degreaser with a non-leaching absorbent, is one option. It’s easy to use and it works well for spot-cleaning smaller stains.
Scrape any standing oil, sand or grit off the spots using a stiff plastic scraper or putty knife and sweep the area clean. Provide good ventilation and wear eye protection, gloves and a dust mask. Spread Pour-N-Restore on the stain with a 1/4-in. notched trowel and let it dry (Photo 1). It can take eight hours or longer to dry depending on the temperature and humidity (for best results, use this product at temps above 60 degrees F). Once it dries to a powder, sweep it up (Photo 2) and throw it into the household trash. Let the moisture from the area evaporate completely, which can take a few days, and the stain should be gone. If the stain remains, reapply the product and scrub it with a push broom or nylon bristle brush. Let it dry, then sweep up the powder and throw it into the trash.
Pour-N-Restore is not recommended for use on asphalt.
Remove stains from larger areas
1 of 2
"Green" degreasing
Use this product for large areas. You can safely rinse it into the storm sewer.
2 of 2
Spray Griot's Oil & Grease Cleaner onto the stain
Spray and wait five minutes before rinsing. If the oil spot has a heavy grease buildup, scrub the spot with a stiff nylon bristle brush (not a wire brush, which can scar the finish) before rinsing.
You can use Griot's Oil & Grease Cleaner to clean and degrease small spots or your entire garage floor. It worked wonders on our oil stains. And the stuff is so mild that it won't harm grass or plants and can be safely washed down the storm sewer, making it suitable for use with pressure-washing systems on larger areas. It's also easy to use: You just spray the liquid on the spot, wait two to five minutes and then spray clean with a hard blast of water. Available at
griotsgarage.com and auto parts stores.
